Question about Panasonic CT-32SX12 32" TV

Television died We have had this particular television for approximately 4 years. It worked fine one night, and the next morning it made no effort to turn on ... period. Tried different outlets, and different methods of turning on - going all the way back to the original remote. We checked for a "reset" button and couldn't find one ... what else can we try before calling someone to fix it, or purchasing a new tv? Nothing happens, at all, when we push the on/off switch ... nothing...at...all.

Anonymous Dec 16, 2007

I am having trouble locating the fuse. I have followed the cord into the set where it is soldered to the board. I do not see any fuse in the line or around the soldered connection. I do not see any glass fuse anywhere. Is there some secret to finding it?
Anonymous Dec 02, 2008

Turn the TV off one night and the next morning, NOTHING!!!! I have already taken the TV apart but the fuse looks ok.

×

1 Answer

Mike Longo

Level 2:

An expert who has achieved level 2 by getting 100 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Vice President:

An expert whose answer got voted for 100 times.
Expert
398 Answers

Unplug the set, remove the back and follow the power cord onto the main board, where you will see a small glass fuse. Replace that fuse with a new GMA 6.3 amp fuse. I have seen many of those fuses in Panasonics "pop" for no apparent reason. If that does not fix it then replace the back and have the set serviced by an experienced tech.

Posted on Jul 08, 2007

Add Your Answer

Upload an image from your computer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

The TV was working fine last night turned it off got up and turned it on in the morning did not work no power or nothing the TV is 11 years old but it is a H HD TV flat screen Panasonic

Mar 14, 2015 | Panasonic Televison & Video

Car starts then dies. Locks and radio do not work.

Any codes?

May 14, 2017 | 2001 Pontiac Grand Am SE

No power. Died when turning on to watch TV.

unplug for a couple of minutes then plug back in and try

Oct 29, 2009 | Niko SV3206 32 in. LCD Television

Just replaced the lamp after 2 years. TV worked

Make sure that the lamp cage is seating well .. then make sure the door is closed properly. there is a door switch and if the door dont close right the switch may be telling the set the lamp is out.

Oct 23, 2009 | Mitsubishi WD-62531 Projection Television

Dead TV Panasonic CT 36HL42CF

have a visitation and bury the next day.

Jul 14, 2009 | Panasonic CT-36HL43 36" TV

I am not getting any sound when I turn on the tv

This Happened To Me Aswell. I Just Turned Up The Tv FullY And The DVD Player Fully And It Shud Work As It Works 4 Me Xx

Mar 27, 2009 | Vizio VM60P 60 in. Plasma TV

Car died right as getting off freeway had to tow home again

shouldnt worry about compression ratio pressures as yet ,if all gauges going up the swanie then either altenator is overcharging and the voltage burnt things out or a gremlin got into works when you visited the mountains in whick case call ghost busters ,must go first customer has arrived

Mar 17, 2009 | 1999 Pontiac Sunfire

Stalls / Dies / dead

this engine fuel pump prassurae low. it fuel pump celan. Your problem sovel

Jul 13, 2008 | 2003 Ford E150

Hitachi 51F510 with NO POWER

Something is preventing the power supply from operating:
Possible causes in order of likelihood:
1) Convergence amps failed overloading the supply (See if you can disconnect them)
2) High Voltage circuit has died. (Right on schedule since your TV is 10 years old)
3) One of the CRTs has shorted
4) The power supply itself has died (Is there a lot of dust covering it?)
See if you can isolate the failure by working down the list.
Hope Ya Fix it!

Feb 15, 2008 | Hitachi 51F510 51" Rear Projection...

Crashing sound on Protron 32 TV

no sound, everything was working fine the night before. woke up the next morning, and turned the tv on, and there was no sound at all. nothing from the TV, DVD, and nothing from the Computer. Please help. [email protected].

Dec 26, 2007 | Protron PLTV-32 Television

Not finding what you are looking for?

View Most Popular

CT-32SX12 32" TV

Televison & Video

Related Question

The TV was working fine last night turned it off got up and turned it on in the morning did not work no power or nothing the TV is 11 years old but it is a H HD TV flat screen Panasonic

Panasonic Televison & Video

Open Questions:

what can cause the fuse to blow up on a television

Jan 29, 2013 | Panasonic CT-32SX12 32" TV

I have a Panasonic CT-32SX12 TV. Dead. Does this model have a "reset" button like tvs of awhile back??

Mar 22, 2011 | Panasonic CT-32SX12 32" TV

My Panasonic CT-32SX just stopped working? I came to turn this TV on and I do not get any response. It's just as if the TV were unplugged. Everything is working correctly around it and we did not experience lightning storms, power outages, etc. I've noticed through browsing on-line that this is a common problem with the CT-32SX and I'm looking to see if anyone has some detailed information regarding the faulty power supply system. Any suggestions are greatly appreciated. Chris Walke

May 14, 2017 | Panasonic CT-32SX12 32" TV

Related Topics:

403 views

Ask a Question

Usually answered in minutes!

Check Out the Latest HD Televisions Report

View all Fixya Reports

Top Panasonic Televison & Video Experts

Demonic-2011

Level 3 Expert

513 Answers

The Knight

Level 3 Expert

76582 Answers

Cindy Wells

Level 3 Expert

6255 Answers

Are you a Panasonic Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

. CT-32SX12 32" TV Manual

CT-32SX12 32" TV

Have a manual for Panasonic CT-32SX12 32" TV? Or just drag it here!

Loading...