Ldn7u i lost the wire harness and im trying to make my own but i need a diagram of the harness so i can make my own

It says the tachometer wire is Yellow/Green, you do not have that listed. You will find it in the list below, it is highlighted..

WIRING INFORMATION 2001 Subaru Legacy

WIREWIRE COLOR LOCATION

12V CONSTANT WIRE WHITE Ignition Harness

12V IGNITION WIRE GREEN Ignition Harness

12V ACCESSORY WIRE YELLOW Ignition Harness

STARTER WIRE WHITE/BLACK Ignition Harness

POWER DOOR LOCK (-) WHITE Harness In Driver's Kick Panel

POWER DOOR UNLOCK (-) GREEN/RED Harness In Driver's Kick Panel

PARKING LIGHTS (+) ORANGE At Light Switch

DOOR TRIGGER (-) PINK/BLACK In White Connector Behind Fuse Box

TRUNK TRIGGER (-) YELLOW/BLUE In White Connector Behind Fuse Box

TRUNK RELEASE (5-wire) LT.GREEN/YELLOW At Motor In Tail Gate

FACTORY ALARM ARM (-) Factory remote only

FACTORY ALARM DISARM (-) Factory remote only

TACHOMETER YELLOW/GREEN At Ignition Coil

BRAKE WIRE (+) WHITE/BLACK At Brake Pedal Switch

HORN TRIGGER (-) RED/GREEN Harness At Steering Column

LEFT FRONT WINDOW UP BLUE/RED At Driver Window Motor Inside Door

LEFT FRONT WINDOW DOWN BLUE At Driver Window Motor Inside Door

RIGHT FRONT WINDOW UP BLUE/RED Harness In Driver's Kick From Driver Door

RIGHT FRONT WINDOW DOWN BLUE Harness In Driver's Kick From Driver Door

LEFT REAR WINDOW UP BLUE/RED Harness In Driver's Kick From Driver Door

LEFT REAR WINDOW DOWN BLUE Harness In Driver's Kick From Driver Door

RIGHT REAR WINDOW UP BLUE/RED Harness In Driver's Kick From Driver Door
RIGHT REAR WINDOW DOWN BLUE Harness In Driver's Kick From Driver Door

Pull the door panels off so u can get to the speakers and match the colors up.

it could be your engine fans too cool of the engine

Here are some sensors.http://www.autozone.com/autozone/parts/1996-Subaru-Legacy/Oxygen-Sensor/_/N-j4zs5Z8gcvp

This diagram is for a 90-98 Subaru but maybe it will help...

Below is a link to the wiring diagram you requested, courtesy of http://the12volt.com

88 Nova Diagram

i havent put mine in yet im just waiting for mi power loom to come through in the postage but im just wondering that if i just put the gps wire in would it work because im hearing from other people that you need to buy some other wire aswell true or not ...?

if the panasonic radio is a factory model, check with a GOOD car audio shop. they can get you the factory wiring harness to plug in, along with the diagram. if the panasonic is a replacement, like a jensen or kenwood, check out CSK Auto or AutoZone for a factory harness adapter. it makes life so much easier...

No solution got but am trying to get wiring diagram from Subaru Dealer Thanks for your help

At your local subaru dealer.