Question about Electrolux Vacuums
Vacuum still works with wand, but brushes will not turn. It is not smoking or smells funny
Does the power head motor stop, or does the brush roll stop. If it is the brush roll stopping, replace the belt and/or the brush roll. If it is the motor, you may need to clean out around the motor, it may not be getting enough air to cool causing it to overheat and stopping. That the brush roll plate off, take out the screw, and the top will come off, then you can check to see if cleaning is the answer, if not, the motor may be bad.
Posted on Jan 15, 2008
I think I know what the problem is with your machine. It's a rather lengthy repair, and I'll be happy to photograph it for you (like I do on most of my Fixya answers), but I'd like to know before doing all of that if you still need help, or if you've already fixed it.
Posted on Apr 10, 2010
the problm is under the top cover of the base,there are some screws on the botton also remove the self adhiesive emblem on the top and remove the screw then the top will come off.ithink what you will find is a burnt circuit board that sets right above the motor
Posted on Apr 23, 2009
Turn the knob on the top of the vacuum all the way to the right.I had the same problem and that fixed it.
Posted on Aug 27, 2009
Tips for a great answer:
Oct 11, 2017 | Bissell Vacuums
Jun 03, 2015 | Eureka Vacuums
Aug 22, 2014 | Electrolux Vacuums
May 31, 2014 | Electrolux EL8807A Precision BrushRoll...
May 27, 2014 | Electrolux Versatility Bagless Upright...
Mar 12, 2014 | Electrolux Vacuums
Dec 25, 2013 | Electrolux EL8807A Precision BrushRoll...
Nov 25, 2013 | Electrolux EL8807A Precision Brushroll...
Usually answered in minutes!