At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Tune into 102.0 then hold button "1" for a few seconds (you may hear a beep as it registers). Tune into 98.0 and then hold button "2" for a few seconds. Tune into the next station and then hold "3" and so on. Now when you press "1" it will go to 102.0 "2" will go to its' preset and so on.
The model number you posted is for a center channel speaker which has no controls, and not knowing the exact model number it's difficult to be specific.
Some Kenwood KDC models allow you to select one of 3 "tuning modes", 1) AUTO1 - Automatic search for stations; 2) AUTO2 - Search Preset stations; 3) MANUAL - Normal manual tuning control. If your Kenwood is one of these models, you need to set the tuning mode to MANUAL. For Kenwood Excelon HD receivers, direct access tuning is done by using the included remote. 1) Press DIRECT button on the remote; 2) Press number buttons to enter desired channel number; 3) Press DIRECT button again to exit direct tuning.
sounds like water damage to the control panel. also the things u listed are together on the same fuses check the fuse also.. if one goes out it can mess up more
You have a US tuner not a European one. Only European tuners can change the even numbers. USA uses the odds. As far as I know, the US models aren't capable of tuning to the evens.
Hi, it depends were you got the radio from mine is doing the same its a grey product and comes from US or other countries.If you are lucky just hold and press the setup key for +- 5 seconds and it will jump to setting HH then press the + or - button were you change the radio, go to area and turn knop on radio to US or other country thats working for you. Hope it helps
Does the radio have a full subscription? Next, check the "Preset/Direct" button and push it until "direct" is lit up. Then you can directly enter the channel number. Also, you can go into the MENU and set what channels to skip and jump to. My guess is that you bumped the "Preset/Direct" button and your radio is in "PRESET A or B or C" - you need direct. Try that first, than get back to me - okay? BTW, I'm assuming you're talking about an XM satellite radio like the one in the photo?
×