My motherboard is not displaying. it was displaying before after switching it off it could not switch on. i changed the processor suspecting that it was burn but still it did not swich on, then my brother tempered with the jumpers, so i need help on jumpers settings on a pentium 3 motherboard
pliz help me
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Switch off your pc and remove the ram. Check the ram or clean by eraser or you can install another new if you have a spare.. Restart the pc . If your problem is same remove the CMOS battery and press the on off switch for 5 minutes and install it again. http://www.youtube.com/watch?v=3B9ff9ei7hk
some pentiums are locked at the set speed but there are no jumpers you have to alter the settings are in the bios eg the timing and there may be step ups to increase the processor speed, but remember you get far faster response times by fitting more memory as overclocking can cause overheating and crashes.