Question about Andis Pets - Others
Posted by Anonymous on
It sounds like you may have a bent hinge which is what the blade slides onto. Please call Andis customer service at 1-800-558-9441 to speak with a customer service rep. They can give you instructions on where to purchase a new hinge or send or clippers in for repair.
Posted on Jul 23, 2008
Push top blade to right side right with finger,then turn clipper on and dip into 3 in one oil,blades only,let clipper run for one minute,clean excess oil off blades,if clipper still want vibrate,take blades off the clipper and clean them,then place back on clipper, I've had this problem many times,i also repair clippers,adjust blades,etc...
Posted on Jan 26, 2009
SOURCE: My GTO model Andis clippers
YOU HAVE TO OPEN DEM UP. TAKE OUT THE SCREWS ON THE TOP DEN TAKE OFF THE BLADE. ONCE YOU HAVE THE BLADE OUT THERE ARE TWO MORE LIL SCREWS UNSCREW THOSE (NOT ALL THE WAY OFF, JUST ENOUGH SO THAT THE BLADE WILL MOVE) ADJUST THE BLADE HOWEVER YOU WANT. IF YOU WANT IT CLOSE FOR A MORE DETAILED CLOSE LINE (NOT TO CLOSE AS DEY WILL CUT YOUR OR THE CLIENTS SKIN). YOU MUST TRY THEM OUT ON YOURSELF SEE IF THEY ARE TOO SHARP, IF THEY ARE TAKE THEM OFF AND ADJUST THEM AGAIN. EASIEST THING TOO DO IS USE A MIRROR, HOLD THE BLADE AGAINST THE MIRROR DEN MOVE IT AT AN 45 ANGLE DEN TIGHTEN THE SCREWS DER (BARBER TRICK).
Posted on Jul 21, 2009
Tips for a great answer:
Feb 04, 2014 | Andis AGC2 Hair Trimmer
Sep 10, 2012 | Andis Pets - Others
Jun 15, 2009 | Andis Outliner II Hair Trimmer
Dec 17, 2008 | Andis 01690 Hair Trimmer
Oct 09, 2008 | Andis 01690 Hair Trimmer
Sep 13, 2008 | Andis 01690 Hair Trimmer
Jun 17, 2008 | Andis 29745 Clipper Headliner Hair Trimmer
47 people viewed this question
Usually answered in minutes!