there is nothing to do with veiw finder,or is it supposed to be like this or what tryed different things nothing changed many thanks garththere is nothing to do with veiw finder,or is it supposed to be like this or what tryed different things nothing changed many thanks garth
u have not sent the right instructions on the cam its a maxim 7000 many thanks garth s can u send me the guide for the cam if u can u have not sent the right instructions on the cam its a maxim 7000
many thanks garth s
can u send me the guide for the cam if u can
You can't post conmments that contain an email address.
Re: Veiw finder is blurred wen i look through it...
Garth
Under the veiwfinders eye peice is a small switch! look in veiw finder and adjust switch to focus and it will clear up for you!
Please rate this response and help us keep this area free! Thank You!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The image of all astronomical telescopes are upside down (SCTs are upside down and reversed). RACI (right angled, correct image) finders do produce a right-side up image. For daytime use a erect image prism eyepiece. Follow below instructions (except 7 in your case)
Get Stellarium or another fine astronomy program
During the day, point the telescope at a part of the landscape about 100 yards away.
Use the lowest power eyepiece (highest number) in the focal tube.
Center the landscape object in the telescope.
Align the finder scope so that it points exactly where the main telescope is.
At night, leave the scope out to reach thermal equilibrium (about an hour for small reflectors and refractors)
If the scope is on a EQ mount, polar align.
Point the finder at the moon. The moon should be in the main scope also.
Practice finding the moon before you start on the planets
Once you are comfortable with the moon and planets, you can go for the deep sky objects
How do you hold your camera? Holding it at arms length and viewing the subject through the screen will practically guarantee a blurred image with most cameras. You might get away with it with cameras equipped with Image Stabilization but not compact digitals. Use the view finder and hold camera firmly against your face. Frame your subject, take a breath in then exhale, stop breathing momentarily and squeeze the button. (Don't forget to start breathing again!) If possible rest your camera on or against a solid object while shooting.
The view finder is the small eyepiece you look through to see your subject that you are filming! If the camera has a seperate screen to watch your playback that can also be used as a view finder!
Please take a second to rate me
THANK YOU!
You error message is your flash circuit which need to be replaced they run around 30 plus dollars for the part or it could be the main board just depends. With out diagnosis it it is hard to really tell.
ive tryed in wat u said but i cant find a little switch pls help me
there is nothing to do with veiw finder,or is it supposed to be like this or what tryed different things nothing changed many thanks garth
u have not sent the right instructions on the cam its a maxim 7000
many thanks garth s
can u send me the guide for the cam if u can
×