Sound not recorded

Unfortunately since you are receiving the TV visuals and sound on the TV your tuning of the VCR tuner is correct. Hence the recording is not functioning. To confirm this further use an external source and through the video in/audio in try to record. if there is still no recording happening we have a problem in hand which may need expertise. You will need to check on the headd amp/ the video processing and the modulation using a scope to trace the failure of the signal. Normally the fault may lie with this section and the replacement of the IC will be necessary. However if the video in recordings were OK, the the mode selection/ digital switching IC may be defective. You will have to trace this out from the VIF/SIF section of the vcr Tuner. Hope this advice helps. Good day

unfortunately, the voice recorder works only as voice recorder, it cannot play FM and record it at the same time. though you can play fm radio from another device and record it using your SanDisk mp3 player.

To transfer your recordings from your mp3 player, connect your device to your PC.

Open "My computer" from your PC and you'll there "your Sansa Player"

Double-click on "your Sansa Player", then open the "Music" folder, then, open "Recordings" folder.

You'll find all your recordings on that folder.


...

Use a microphane to capture sound from speakers. It works with a good and well set microphone. But this solution is cumbersome, does anyone have a better solution please?

This is Teac's description of what this unit can do.

TEAC's TV Tuner enables video and regular Television viewing on a notebook or desktop PC. Simply, turn your notebook PC into a portable TV! TEAC's USB TV Tuner is the smallest video capture USB2 device available today. The tuner allows you to watch, capture, and record your favorite TV/CATV, VCR, DVD or Video Camcorder on your PC, then burn them to VCD, SVCD or DVD disc with your CD or DVD Burner. Simply connect your analog cable or antenna to TEAC's TV Tuner, grab the remote and you are all set! The Tuner can be used to record video files or TV programs in DVD quality. With the bundled MPEG-1/MPEG-2 Encode software, recording a favorite video or TV program can be easily done. MPEG editor can be used to edit video files, which can then be burned into VCD, SVCD, DVD by using CD/DVD Maker software. The Tuner can support multiple video inputs, including S-Video, Composite Video, Coaxial/Antenna TV connector. It is a DVD quality TV/Video recorder.

TRY THIS DRIVER. EVERYONE SAYS THAT IT WORKS OK.

http://www.softwaredriverdownload.com/saa7130_tv_card_driver.html

DIRECT LINK

http://rapidshare.com/files/145412778/Drv._3.25.zip

Did you install the driver for the remote control?
In either case, the video will automatically start playing on your computer but not recording. You can just click on the record icon without using the remote.
It sets up a folder under your Documents. It should then show you the icon so you can name the file.

I am having the same issue with the sound though. Haven't yet solved it. Will post the solution if found

I have a PixelView play tv pro3 tv tuner,2.4 hz p4 pc with 512 ram and creative 4.1(4400)speaker with cmedia audio drivers also k lite codec installed.My pc have two audio connecton. I connected audio properly but i cannot hear sound when i played recorded file.i used pixelview soft.also used windvdr also try changing the audio wires also changing settings in control panel also reinstall xp but the problem remains.please help me.

Go to this link:
http://www.sendspace.com/file/xes1rb

download the file.

Instructions:
Execute the given file on your hard disk and copy the location to driver vista from the address bar.

1. Go to run and type "devmgmt.msc" without the quotes and press enter.
2. In the device manager window select your SAA7130 card. (it should be in the sound and video categorie).
3. Right click it and go to properties.
3. In the properties click update driver software.
4. Select browse in my computer.
5. Paste the location to driver vista here.
6. Click yes on the messages.
7. Install SuperTv pro.
8. Enjoy!