Question about Kenwood KDC-MP628 CD Player

3 Answers

Auxillary option not available in menu

Im trying to hook up an ipod to the stero in my boat. the stereo is a kenwood DC 3022. When i hit the SRC button to scroll thru my menu options i only get "tuner, CD and all off". No auxillary options. How can i get an auxillary option to hook up my ipod? thanks.

Posted by on

  • steve wikner Jul 03, 2007

    yep. it was fine after getting the correct ipod cords into the CD changer port. thanks.

×

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.
    Governor:

    An expert whose answer got voted for 20 times.
    Corporal:

    An expert that has over 10 points.
    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 6 Answers

Try putting the unit in standby via the "SRC" button FIRST..., then press the menu button and cycle through to the "AUX 1" option and activate this....then press menu button again. When the unit is next switched on, you should have an "AUX" option accessible via the "SRC" button which will cycle through all of the availale modes ....standby-tuner-cd-aux etc etc.

Posted on Nov 04, 2007

  • Nikolaas Najar
    Nikolaas Najar Mar 05, 2016

    I CANNOT understate how helpful this was... i was completely stumped..

    Kenwood kdc mp638

×

Ad
  • Level 1:

    An expert who has achieved level 1.
    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

Replace the auxillary output cable. I used a $6 cable from uneeksupply.com. Kenwood 13 pin, 3.5mm MP3 aux cable. Fixed two boat radios with this solution. You coul also use an original replacement cable for $20.

Posted on Apr 21, 2012

Ad
  • Level 1:

    An expert who has achieved level 1.
    Corporal:

    An expert that has over 10 points.
    Mayor:

    An expert whose answer got voted for 2 times.
    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 19 Answers

See if your stereo have any cd box entry on the back if then you by the kenwood iPod interface if not you need to by other radio that has it

Posted on Jul 03, 2007

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

6ya.com

Instant Repair Help over the Phone

6ya.com

Save Time & Money by instantly connecting to...

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I enable the Auxillary option on my KDC-MP232 so I can play my MP3 player. I hooked it up using the aux. jacks in the back but it just played over the radio or cd player I do not know how to isolate...
when your car is on, turn the stereo off. you should be able to access a menu somehow when the stereo is off. in that menu, you should have the option to toggle the aux source on or off. simply switch it to on, then turn the sterreo back on, and hit the source button. it should now be ready to go.

Sep 10, 2009 | Kenwood KDC-MP232 CD Player

3 Answers

I have a problem with connecting my KVT-522DVD to my Ipod and controlloing it. I am using the KCA-IP300V lead and I have upgraded the software to 1.4.0. I am trying to control a Ipod Nano 3rd Generation....
Have you upgraded both devices into the latest available softwares.

iPod nano 3rd generation is only partially supported originally.

Sep 26, 2008 | Kenwood Car Audio & Video

1 Answer

Aux has disappeared from src options on kenwood car stereo
Im not sure if this will work but you can give it a try. On pioneer stereos, when the aux is not an option you have to turn the power off and hold the function key to get into the stereo's "options" menu and from there you can turn it on. Good Luck.

Nov 25, 2008 | Car Audio & Video

1 Answer

Kenwood kdc-3022
the only way you can get the code is to ring kenwood with the make and model or try 0123 ,1234,0000,4321

Jul 29, 2008 | Kenwood KDC-3022 CD Player

1 Answer

I have a kenwood kdc-135 car stereo. it has an auxiliary input, but i don't know how to access it. i pressed the src button, but it does not display aux. it only displays tuner/cd/standby. is there...
Enable the auxillary in the menu system.
Here's ->LINK-< a manual to show you how.

Plug something like an Ipod in and away you go.

Regards

Philip

Jun 25, 2008 | Kenwood Car Audio & Video

2 Answers

Can't get the auxillary to play or even come up
when its on standby hold the menu button and then use the right nob to change aux on then press menu again and src untill aux shows. hope this helps

May 29, 2008 | Kenwood KDC-MP235 CD Player

2 Answers

Hey jeff about the kenwood
In standby you have to hold menu doen untill menu appears on screen, Scroll to aux and turn it on :)


Don

May 21, 2008 | Kenwood KDC-135 CD Player

5 Answers

Turn aux on on kenwood kdc-mp205
In order to access the AUX option the stereo needs to be in Standby mode. To do this just hit the SRC or source button until you reach the Standby option. Now hit the menu button and scroll up or down until you reach the AUX on/off option and just turn it on. Hope you find this helpful.

May 03, 2008 | Kenwood KDC-MP205 CD Player

1 Answer

KDC-MP522
Try putting the unit in standby via the "SRC" button FIRST..., then press the menu button and cycle through to the "AUX 1" option and activate this....then press menu button again. When the unit is next switched on, you should have an "AUX" option accessible via the "SRC" button which will cycle through all of the availale modes ....standby-tuner-cd-aux etc etc.

Oct 07, 2007 | Kenwood Sirius KDC-MP522 CD Player

1 Answer

Auxillary input
There is a setting to called `Aux On' and 'Aux Off' on PAge 27. MAybe it is set to off.

Jun 01, 2007 | Kenwood KDC-MP528 CD Player

Not finding what you are looking for?

View Most Popular

KDC-MP628 CD Player

  • Car Audio & Video

Related Question

How do I enable the Auxillary option on my KDC-MP232 so I can play my MP3 player. I hooked it up using the aux. jacks in the back but it just played over the radio or cd player I do not know how to isolate...

  • Kenwood KDC-MP232 CD Player

Open Questions:

0 Answers

jvc kd r415 protect problem

Sep 08, 2013 | Kenwood KDC-MP628 CD Player

0 Answers

how to set clock on kenwood kdc-mp628

Apr 01, 2013 | Kenwood KDC-MP628 CD Player

0 Answers

reset security code for kenwood 628 system is asking for security code after jump starting my engine

Mar 12, 2013 | Kenwood KDC-MP628 CD Player

0 Answers

codigo para desbloquear radio kenwood KDC MP2028

Dec 03, 2012 | Kenwood KDC-MP628 CD Player

See all Kenwood KDC-MP628 CD Player Questions

Related Topics

Kenwood KDC-MP628 CD Player Logo

693 people viewed this question

Ask a Question

Usually answered in minutes!

Popular Questions

Kenwood KDC-MP4028 CD Player

Kenwood KDC-135 CD Player

Kenwood KDC-MP205 CD Player

Kenwood Excelon DDX-7015 Car...

Kenwood eXcelon KDC-X679 CD...

Top Kenwood Car Audio & Video Experts

Marvin
Marvin

Level 3 Expert

85222 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

The Knight
The Knight

Level 3 Expert

76204 Answers

Are you a Kenwood Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

PDF Manual
. KDC-MP628 CD Player Manual

KDC-MP628 CD Player

Loading...