Question about Bosch 18 in. SRS45E02 / SRS45E08 Exxcel Slim-Line Free-standing Dishwasher

1 Answer

Bosch dish washer SGS56E02GB

My dish washer is stuck in draining step. the machine doesnot stop draining even when I open the door. the reset bottons seem not resetting .even after waiting for hours the drainig pump goes on and on.

Posted by on

  • 1 more comment 
  • Majid Mostafaie-Mehr Jul 03, 2007

    briliant comment. fixed in seconds!!!!!!!!

  • UncleJoe2008 Apr 07, 2008

    We had the same problem as mmmehr.
    After unblocking a scummed up waste pipe, the machine worked for one cycle, then remained in drain phase, even after opening the door.

    We tilted the machine backward as suggested - nothing happened - then tried forward. LOADS of water poured out. We started the machine again and after a couple of minutes it sprang into life.
    TOP TIP! Thanks!!

  • Anonymous Mar 20, 2014

    dish washer has always ran for hours on every cycle. How do I reset the timer.

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Filmmaker:

    Uploaded 5 video answers.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 22 Answers

Anti flood device has been activated, this means you have water in the base of appliance. most likely a leak, or if you have been using 3 in 1 tablets, and rinse aid this will over foam appliance and foams leaks into base.. try tipping d/w back to let water out of base..then try d/w again... if anti flood activates again...call an engineer.. ps check big nut that secures salt container to base of d/w, it can come loose which will cause water to leak into base ally

Posted on Jul 02, 2007

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Samsung dish washer won't stop running event with the door open no leaks no water anywhere pump pushes water out drain hose


if you can hear it running even with door open its probably in a fault mode as this the only circumstance in which it will run with the door open, what you are hearing is the drain pump and its doing that because there is a leak in the base of the machine setting off its flood switch, if you pull the dishwasher out and lean it back you will see water run out the bottom, then you need to find where its leaking from

Dec 26, 2016 | Samsung Washing Machines

2 Answers

My washer is not working it begins to spin stops and has the letters LE appearing.


Hi,

This a common problem for all front loaders. Your washer will not drain or work 'cause your outlet filter is clogged or an unusually heavy load. The small door is on the left side front bottom of your washer. Remove the door with a putty knife or thin butter knife inserted in the middle top of the access panel door. Drain the water from the filter housing by pulling the tube out of the clip and unplugging, allow it to run into a bucket while the machine is in spin only mode. This mode is acheived when the washer is first powered on press the spin button until no spin is reached then run. Run in this mode until no water is draining from the tube in the bucket. Keep the tube as low as possible. When water has stopped coming out of the tube turn off the washer and unplug from the wall. This step is important because this resets the fault. Expect some water to come out when you open the filter housing by turning counterclockwise until you can pull the filter from its housing. Clean out your filter, return to housing turning clockwise until seated and recap the tube and place in the holder, refit the cover and plug back into the wall. Fixed. You may also need to lighten the load a bit but I always try full on load anyways. If it fails again just lighten, unplug wait >1 minute then replug and run.

Goodluck..

May 27, 2008 | LG Washing Machines

1 Answer

Wash started cycle. Wife stopped it at beginning of cycle. Now washer will not start at at. Lid switch is good. Will not spin, rinse, restart wash, nothing, not even clicking.


Does unit have a reset button? If it has manual control for cycle did you try going clockwise to the start position and then restarting?

If she stopped the cycle by opening the door perhaps that switch is still stuck in an open position.

Aug 31, 2015 | Whirlpool Ultimate Care II LSQ9564J Top...

2 Answers

I have a whirlpool duet model wfw70hebw. The washer stopped and I can't unlock the door. Have error code E1 F9


Try unplugging for 30 seconds and plug back in. See if you are able to reset the controls after that.

Jan 24, 2015 | Whirlpool Washing Machines

1 Answer

How do I unlock a whirlpool duet washer


from a previous discussion:

Wait at least three minutes after the end of the cycle before attempting to unlock your Whirlpool washer. The door will not unlock until the motor speed equals 0 and 180 seconds have elapsed since the motor control unit received the "Stop" command. If the water in the washer is warmer than 122 degrees Fahrenheit or the water level is set higher than Wool, Delicate or Hand Wash, the washer must drain before the door latch will unlock 2 Hold down the "Control Lock" button on your Whirlpool washer for three seconds at the end of the washing cycle. Listen, and when you hear the unlatching sound, the door should open.3 If your Whirlpool washer did not unlock at the end of Step 1, press and hold the "End of Cycle" button for five seconds to manually reset your washing machine.4 Unplug your Whirlpool washer and leave it unplugged for 45 minutes. After 45 minutes, plug your washer back in. The washer's programming should be reset and the door should open.5 Manually unlock the door of your Whirlpool washing machine. Make sure to unplug the appliance before completing the manual unlock. Use a screwdriver to remove the metal strip, called the toe panel, at the bottom of the washing machine. Once you've removed the toe panel, reach up inside the front panel of the washer and feel around for the door latch. Locate the tear-drop shaped tab at the bottom of the door latch and pull it gently. When you hear a click, the door should open.

unlock-whirlpool-duet-washer-u40lsvyytnuesyuv3fbafhtd-3-0.jpg

Jan 04, 2015 | Whirlpool Washing Machines

1 Answer

How do i reset the door lock


turn off the mains power
make sure its drained out

will open after 5 mins or so
check the filters are not blocked up
and once its clear
hold in the start stop or menu botton and then turn the mains on
to reset the controller

if it still wont open at the end of a test cycle i would assume some blockages it still there

Aug 31, 2014 | Candy Washing Machines

1 Answer

Why is my dishwasher is stuck in the drain cycle


What kind of dish washer. It sounds like the switch is stuck try giving the dish washer a through cleaning.

I’m happy to help further over the phone at https://www.6ya.com/expert/joshua_ac64e182ed26f66d

Aug 13, 2014 | Samsung DMT400RHS Builtin Dishwasher

1 Answer

Water not draining even after reset attempts


Did you check the most obvious item - the motor and belt that spin the drum and powers the pump assembly

Sep 12, 2017 | Equator EZ 3600 CEE Front Load Washer /...

1 Answer

I have a Bosh Logic dishwasher SGS65L12GB/04 The other day it got to 1 min left and would not stop pumping out water and continued even with the door open. After 5 mins playing around it started working...


Hi Jonathan,

Welcome to FixYa.

Your float may have got stuck or it's possible that you have water leaking into the bottom of the washer. In the bottom of the wash compartment, next to the drain you will find a plastic dome/mushroom (the float). You might need to rotate the bottom spray arm to see it.

Turn the washer on so that the pump starts to run, open the door and push down on the float. This should stop the pump running. When you let go of the float, if it rises back up on its own, then it's almost certain that you have water in the bottom of the washer. If this is the case please post back for further assistance. If the float stays down, then it may have simply got stuck.

Please try this simple test and post back with the results.

Regards,
BElectric

Nov 11, 2010 | Bosch Dishwashers

3 Answers

Washer Dryer - drum is filled with water even when switched off and door can still open!


Try the valves inside the back where the water hoses connect to the machine they should default to the closed position when water is not required

Oct 31, 2008 | De Dietrich LZ9619 Front Load Washer /...

Not finding what you are looking for?
Bosch 18 in. SRS45E02 / SRS45E08 Exxcel Slim-Line Free-standing Dishwasher Logo

1,445 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bosch Dishwashers Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

jimorris77

Level 3 Expert

411 Answers

peter gittos
peter gittos

Level 2 Expert

247 Answers

Are you a Bosch Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...