Answering machine I need the manual...my machine won't take a message,i can call it and the messgae plays but when i get home theres nothing on it...not sure if its hooked up properly,so the manual would help...thanks for any help

Press the PLAY/STOP button to hear the messages. When you press the MEMO button, the system waits for you to leave a message.

If you need a manual, you may download a copy here. The message playback instructions are on page 33, the MEMO button is described on page 34.

Press the PLAY/STOP button to hear the messages. When you press the MEMO button, the system waits for you to leave a message.

If you need a manual, you may download a copy here. The message playback instructions are on page 33, the MEMO button is described on page 34.

Call your phone, let the outgoing message play when the machine answers, and wait for the beep. After the beep, enter the 3-digit security code you'll find on a sticker on the bottom of the machine. The machine will beep twice to let you know you entered the right code and it's ready for your commands.

Remote commands:

1# Plays messages in mailbox 1
2# Plays messages in mailbox 2
3# Deletes old messages (you need to play them all back first)
7# Starts recording a new outgoing message (press 7# again to stop recording)
9# Turn the system on or off
0# Monitor the room

While you're playing messages (you pressed either 1# or 2#) you have these commands:

3# Erase current message
6# Repeat previous message
7# Skip to next message
8# Repeat current message
## Stop playback

After your messages have played, you have 20 seconds to enter another command before the machine disconnects automatically.

You can download the manual here so you'll have a copy for future reference.

Since you declined to specify the model of your machine, pick the model from the list at
http://www.home-electronics.net/ge/pc/user-manuals.asp

To erase a message while it is playing, press the ON/OFF ERASE button. The

answering system announces, "Message Erased" to confirm the message has been

erased.

To Erase All Messages: When the answering system isn't playing or recording messages, press and hold

the ERASE button until you hear the "Messages Erased" announcement. Release the

button after the announcement. This feature allows you to erase all old messages

but not new messages. If you do not have any messages, the answering system

announces, "Zero Messages."
User Manual: http://www.home-electronics.net/USER-GUIDES/29875_DOM_EN_AN_IB.pdf

To erase a message while playing, press the ON/OFF ERASE button. To delete all old message, while not playing or recording a message, press and hold the ON/OFF ERASE button until "MESSAGES ERASED" appears.

You can download a manual at
http://www.home-electronics.net/USER-GUIDES/29888_DOM_EN_AN_IB.pdf

REMOTE ACCESS

This section explains the remote access process for use with any touchtone

phone.

1. Dial the phone number for the answering machine.

2. After the answering system answers, press any numbered key on the

touch-tone pad to bypass the outgoing announcement, or wait until

the announcement finishes.

3. Enter the security code after you hear the tone.

4. Follow the voice menu to use the answering machine's remote functions.

The remote feature enables you to perform the following functions:

To Press this button

Review message 1

Play back messages 2

Stop message play back 2

Erase message 0

(during message playback)

Skip message 3

Turn off/on answerer 4

Review voice menu options 7
No valid dialing tones for 15 seconds will hang up the telephone line.

You can get the manual on the link below if you need page 31.

http://www.home-electronics.net/USER-GUIDES/26976_DOM_ES_CL_IB.pdf

Good luck

Most answering machines have a 'remote code' to access messages via remote. (from another phone line when you aren't at home.) Look for the manual or look on the bottom of the unit itself.

If you do not see a code for it. Or have the manual, find your model online and the manufacturer should have the user manual online for free. It should provide the code for remote access.

Typically, you call the phone, when the answering machine picks up, you would dial the security code and the answering machine will then start playing your messages.

Hope this helps. Good luck!

I read thru the manual. There is nothing bout recovery of factory messages. If you recorded your own, try deleting it. Or unplug the base from power and try a reset. This is from the manual. At the end, I gave you a link to the manual!

Using a pre-recorded greeting
message
If you erase or do not record your own
greeting message, the unit plays a prerecorded
greeting message for callers
and asks them to leave messages. If the
message recording time (page 39) is set
to “Greeting only”, caller messages
are not recorded and the unit plays a
different pre-recorded greeting message
asking callers to call again.


http://service.us.panasonic.com/OPERMANPDF/KXTG9331.PDF

i found this after searching the web for a long, long time.
http://safemanuals.com/user-guide-instructions-owner-manual/AUDIOVOX/AXT847-_E