SOURCE: Beeping Sound on Sony CCD-TRV318
Your camera has problem in take-up reel section. it can be mechanical or electrical problem. Skilled/ qualified technician can understand easily what i said.
SOURCE: Sony Handycam issue - repair/replace?
Hi,
Your camera has bad CCD Imager and needs to be replaced this part. Good news is Sony will repair your DCR-TRV19E free of cost. Please check Sony Website for details.
Regards,
SOURCE: Audio
I am one of the lead technicians at VideoOneRepair.com. We are a repair shop that specializes in only Sony and Canon Prosumer camcorders.
The problem that you are experiencing with your Sony VX2100 camcorder is a common complaint on this model camcorder. It is not a defect with the camcorder, it is simply the most common complaint when the mechanically assembly is not running smoothly and perfectly. There are parts of the mechanically assembly that over a period of time wear and also possibly defective parts that can cause this problem. It will usually start off as audio dropout and then progressively get worse until you also have video dropout as well. The average repair cost for this repair is usually between $250 and $450 parts and labor. This also includes cleaning and servicing.
We also offer a 6 month guarantee on the entire camcorder, not just what it was sent in for. The estimate and the return shipping
are free even if you do not have the camcorder repaired. Please feel free to call, email or post any questions you have and I would be happy to respond.
Sincerely,
Sheryl Bahr
www.VideoOneRepair.Com
Sony VX 2100 Camcorder Repair
888-283-2228
SOURCE: PD 150 will record but,during the play back you
Hi,
The problem is of drum assembly which normally called Head of the camera, it needs replacement. When horizontal or vertical lines appears it means the drum start malfunctioning and it needs replacement. For this please see the link click here.
Thanks.
338 views
Usually answered in minutes!
I suspect something else is the issue. The records cannot be stored horizontally or they warp and this causes the needle to skip. If they are not flat as glass, they will not track properly. We used to sandwich vinyl disks between glass and put them in an oven to straighten them. There is some risk of course.
DAve
×