Cannot connect to network to print
SOURCE: KONICA MINOLTA BIZHUB 750 WITH ERROR CODE C8301
It is a code relating to FM1 fan. The fan is the one on the rear of the machine top right corner behind an ozone filter. If the fan is ok could be a blown icp. *PLEASE NOTE: I WOULD NOT ADVISE YOU REMOVE ANY PANELS OR CARRY OUT ANY ELECTRICAL WORK UNLESS YOU KNOW WHAT YOU ARE DOING AND THE COPIER IS UNPLUGGED FROM THE MAINS SUPPLY*
SOURCE: what does code 2454 mean on the konica minolta
Developing motor for the Black, working in conjunction with Toner Control Sensor.
Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f
SOURCE: how do you reset the konica minolta bizhub c451
Network settings are accessed through the Administrator menu. Press Utility/Counter, then choice #3 should be Administator Settings. Enter your admin password and Network Settings should be choice #5.
Also, if the bizhub is already on the network, you can enter the IP address into your web browser and log in as an administrator to get to the network settings.
SOURCE: Konica Minolta bizhub 210 error m2 appear on
m2 means it already reach its copy life of the drum and developer. a service technician can only do this.
SOURCE: The print margins on my Konica Minolta Bizhub c203...
Check and see if it does it on copies too. If so then your paper trays maybe out of center or your paper guides may be open. If everything is center and registration is correct, your print may be in the "Void Margin" this is an area around the page the machine will not put toner in. Konica Minolta Bizhub C203 copiers do not have an edge to edge print capability
866 views
Usually answered in minutes!
×