We have a Safety Craft Fold-a-way crib model #80-110. We broke the latch that holds the side in place at the bottom corner. (Not the drop side. The other side.) Where can we find something to fix it?

Some of these Pack n Plays are double jointed where you fold the sides. Feel around the buttons you release the sides with and see if there isnt a release button on each side of the joint. Remember, all Pack N Plays use a safety on the floor of the playpen that must be lifted to allow the sides to fold. I think you have already done that but the second release button is holding you up.

Hi, to set up the pack and play, first latch each of the four sides together. (Each side rail latches together in the middle -- just straighten the rail.) Once all four sides are locked and straight, push down on the center of the pack and play bottom (it's probably red) until it snaps into place.

To fold the pack and play up, just follow these instructions in reverse -- pull the bottom up first, then press in the button on each side rail to fold up each side.

Always make sure the pack and play is completely set up and locked before putting a child in it!

Doesnt seem to be, found this.

Washington, D.C. - The Smith Cabinet Mfg. Co., Inc., Salem, IN, in cooperation with the U.S. Consumer Product Safety Commission (CPSC), is voluntarily recalling 1,735 Childcraft cribs model nos. 15811, 15821, 15961 and 15991 if they have loose or missing side slats. These cribs were imported from Italy and sold nationwide from a limited number of retail stores after September 1988.

Checking the model number at the Storkcraft website is not possible at the moment due to overwhelming traffic. Check the manufacturing date and compare it to the information below to assess whether your crib might be involved. This recall involves Stork Craft drop-side cribs and Stork Craft drop-side cribs with the Fisher- Price logo. This recall does not involve any cribs that do not have a drop-side. This recall does
not involve any cribs with metal rod drop-side hardware. It involves only those cribs with plastic
trigger and one-hand-system drop-side hardware.
This recall includes Stork Craft cribs with manufacturing and distribution dates between January
1993 and October 2009. This recall also includes Stork Craft cribs with the Fisher-Price logo that
have manufacturing dates between October 1997 and December 2004. The Stork Craft cribs with
the Fisher-Price logo were first sold in the U.S. in July 1998 and in Canada in September 1998.
The cribs were sold in various styles and finishes. The manufacture date, model number, crib
name, country of origin, and the firm’s name, address, and contact information are located on the
assembly instruction sheet attached to the mattress support board.

No. The cribs being recalled are made by StorkCraft but any crib with a drop side that has plastic parts could pose a problem. Make sure the side latches securely and that the space between the side and themattress is not large enough for a child's head to get trapped.
This recall involves Stork Craft drop-side cribs and Stork Craft drop-side cribs with the Fisher- Price logo. This recall does not involve any cribs that do not have a drop-side. This recall does
not involve any cribs with metal rod drop-side hardware. It involves only those cribs with plastic
trigger and one-hand-system drop-side hardware.
This recall includes Stork Craft cribs with manufacturing and distribution dates between January
1993 and October 2009. This recall also includes Stork Craft cribs with the Fisher-Price logo that
have manufacturing dates between October 1997 and December 2004. The Stork Craft cribs with
the Fisher-Price logo were first sold in the U.S. in July 1998 and in Canada in September 1998.

Checking the model number at the Storkcraft website is not possible at the moment due to overwhelming traffic. Check the manufacturing date and compare it to the information below to assess whether your crib might be involved. This recall involves Stork Craft drop-side cribs and Stork Craft drop-side cribs with the Fisher- Price logo. This recall does not involve any cribs that do not have a drop-side. This recall does
not involve any cribs with metal rod drop-side hardware. It involves only those cribs with plastic
trigger and one-hand-system drop-side hardware.
This recall includes Stork Craft cribs with manufacturing and distribution dates between January
1993 and October 2009. This recall also includes Stork Craft cribs with the Fisher-Price logo that
have manufacturing dates between October 1997 and December 2004. The Stork Craft cribs with
the Fisher-Price logo were first sold in the U.S. in July 1998 and in Canada in September 1998.
The cribs were sold in various styles and finishes. The manufacture date, model number, crib
name, country of origin, and the firm’s name, address, and contact information are located on the
assembly instruction sheet attached to the mattress support board.

To get assembly instructions go to;
http://www.childcraftindustries.com/childcraft/assistance/

and enter your crib model number. The number you gave does not look correct.



Information from Child Craft Industries

MODEL NUMBER VERIFICATION:
Crib model numbers are stamped directly on the crib in black ink on the underneath bottom edge of one of the crib sides, headboard, footboard or stamped on the label attached to the inside face of footboard bottom rail.

On other Child Craft and/or Legacy furniture the model number will be stamped in black ink on the back panel.

Often "47167" and "01700291" are mistaken for model numbers. These numbers are NOT valid model numbers.

You need to read this the possibly call them up and read them the riot act as it appears there is a safety recall on their cribs.

http://www.storkcraft.com/Recalls.aspx?Recalls=USA

This a quote from the recall notice "

Vancouver, January 13, 2009 / CNW / - Stork Craft Manufacturing Inc., in keeping with its commitment to quality and safety, today announced a quality and safety advisory on cribs manufactured between May 2000 and November 2008.

Robert

Please take a moment to rate this solution

p.s. if they give you a hard time about it i'll send you the website to send an email to regarding their non compliance

The company said this is discontinued and cannot be replaced. They no longer use this type of latch bracket. I guess we will have to purchase a new crib.

http://www.productsamerica.com/index.html You might want to also check out this website.