Tungstun e2 touch screen not working

take out the battery and put it back in

you can buy the app PowerDigi from palm powerups, it let you fix calibration problems up to 70 points, it worked just fine with my E2

you should have selected yes. Now do a hard reset, reset your phone to factory settings.

System/Set Up

actually ur Digitizer is faulty u can replace it urself cost around 25 $ or so do u want to proceed let me know , unless u change the touch panel digitizer u will be stuck at align screen thing

let me know if i can help more

RATE ME WELL !

It's possible that the battery can no longer hold a charge anymore.

Check with Palm to see if there is a replacement available.

It should work if you have a car charger on it while using it.

Turn it on pressing the reset at the same time. If this was helpful, please post as such. If it fixed it....fixya.TY

Try a hard reset and if that doesn't work, drain your battery then recharge it. if that doesn't work than you'll just have to deal with it. I have a Palm Tungsten E2 and it has the same problem

The digitizer is defective and needs to be replaced.

You can find digitizer parts in ebay or other on-line companies, at reasonable prices.

Regarding the labor cost, depending of the repair shop you choose, it may be cheap or expensive.

Also, if you have minimum experience and skills in fixing electronics, you can try it. really is not so difficult, and minimum set of tools are needed for it

Best regards,

Have you tried pushing the reset button on back to see if it comes on?