I am looking for a manual for user and parts
SOURCE: Does anyone know who make Astro Power wire
As far as I know, they are made by Cebora which is an Italian company. Try welding-direct.com as well, you should be able to search for parts through them.
Good Luck!
SOURCE: what are the hot and negatives on my astro power
If you use argon gas the gun is positive and the clamp is ground/negative. If no gas is used then it is the opposite
SOURCE: I HAVE A POWER MIG 110 DOES NOT FEED WIRE UNLESS
Hi:
If your drive rolls need an extra pressure on them, that means you are using an oversize rolls, you did not mention what kind of wire is it (solid or fluxcore) probably your drive rolls are 035.
If youa re using fluxcore wire (no gas needed) the you should buy a knurled type roll that will cure the problem. Your machine is capable to weld up to 3/16" thickness using flux core wire or 10 gauge using solid wire-gas.
If this was useful to you please vote, thanks.
SOURCE: I'm looking to replace the
Easy enough, Your gas nozzle is compatible with a tweco part number 21-50, this nozzle has the insulator included
You can locate at any local weld supply like MSC Industrial or Praxair.
Hope this helps
Thanks
Please rate FIXYA
1,765 views
Usually answered in minutes!
×