My Panasonic CD STEREO SYSTEM SA-AK 50 is not getting switched ON. When I am switching ON it gets OFF. Please help me. Regards.

Hello Zubair, to connect your phone to the SA-AK 67, you need a cable that has two RCA connectors (White and Red) to a 3.5mm stereo jack
The RCA connectors, you connect them in the AUX input that is on the rear panel of the SA-AK67 and the 3.5mm stereo jack, in the headphone output of your phone
You select Aux on the Panasonic, you play something on your cell phone and you're done
I hope you find the information useful
Greetings Franco Dosil
Hola Zubair, para conectar tu tel?fono al SA-AK 67, necesitas un cable que tenga dos conectores RCA (Blanco y Rojo) a una ficha 3,5mm est?reo
Los conectores RCA, los conectas en la entrada AUX que esta en el panel trasero del SA-AK67 y el conector 3,5mm est?reo, en la salida de auriculares de tu tel?fono
Seleccionas Aux en el Panasonic, reproduces algo en el celular y listo
Espero te sea util la informacion
Saludos Franco Dosil


http://www.usersmanualguide.com/panasonic/cd_stereo_system/sa-ak57 http://www.usersmanualguide.com/panasonic/cd_stereo_system/sa-ak77

Panasonic remote controls can be obtained by calling 1-800-833-9626 or visit www.panasonic.com/parts. Parts Ordering

Download its service manual. It will have all details about error codes.

Hi pjwivell ..
Are you sure that it SA AK 750?
well here is a here for SC AK750
download the manual and try if it works for you..
http://www2.panasonic.com/consumer-electronics/support/Audio/Home-Theater/Mini-Systems/model.SC-AK750
please give me update if you had any success... thanks

my set model SA-AK67
its cd mechanism motor is not working.supply ic coming from main pcb to cd loader ocb.please advice

Hello friends,
I have Panasonic home theater system SA-AK177 and having power up problem.System is on st by mode and not getting ON.Let me tell you that since long time it was not in use and packed in the box for long time.Since 2 days i have oped up from box and kept it in open air.




Kindly help me out please.I am technical person by profession.I can follow your guidance to solve the problem [email protected] is my gmail id.Thank you so much.

Maybe a symptom would help us answer this.

this is something a tech expert on electronics can handle. even replacing parts has to be attended by a pro-technician. something is wrong with your DSP processor or system components. it could be the switch only or it could be the processor.

Recheck the joints of the terminals that join the boards together. Resolder the power supply.