We were watching my 27" RCA when it just shut off...the screen went black and it just beeped every second. When I unplugged it, the beeping didn't stop right away, but slowly stopped after a few seconds.
The beeping sound is the power supply trying to start up. That means there is a short somewhere inside the set. On these TV sets most of the time this trouble is in the horizontal sweep circuit. Sorry but the only way to reset a TV set like this is to unplug it for several hours. But in this case I doubt very much it will work. If you have no solid state repair experience then please call in a certified tech to assist you in this repair. Let me know how you made out. Good Luck
Posted on Jun 28, 2007
160 views
Usually answered in minutes!
×