Decode region on dvd player

There is no region hack for that dvd player.

anyone has a working solution? I have the same model and I have heaps of DVDs from Europe that do not play...

REGION FREE CODES FOR DVD & BLU-RAY - try these WEB sites.

www.dvdexploder.com/www.videohelp.com/dvdhackswww.download-info.com/dvd/index_new.htmhttp://www.dvddemystifiziert.de/codefree_en/codefree.html

1: Turn DVD player on, with NO DVD in the tray.

2: Press Repeat on remote control (bottom right key)

3: Enter 76884

4: Press 9

5: Open tray, close tray

6: Turn off DVD player, turn it back on.

Hello, please get the code here : www.regionfreedvd.net/ www.dvdripper.org/dvd-region-codes-vs-ntscpal/ www.regionfreedvd.net/players.html
www.dvdreviewer.co.uk/Forums/...region_code/page1
Best Regards, Jay_rfvbnm

Some players are harder than others to do this but you may want to try here or here

You can try this options..hope this helps;
RCA DRA4008 / DRC220N

1. Turn player on with no disc in the tray
2. Press MENU, 1, 6, 7, Mute
3. Press EJECT and exit the menu

RCA DRC105N / DRC198N

1. Open tray
2. Press 1, 6, 7, 1, 9 on your remote
3. Select region code (0 for all regions)

RCA DRC230N / DRC230L / DRC232N / DRC233N

1. Power on player
2. Open the tray
3. Enter 1, 6, 7, 1, 9
OSD shows current region
4. Enter 0-6 for region setting before screen disappears
   (Enter 0 for region free)
   Display shows new region assignment (displays "ALL" if 0 is selected)
5. Power off

RCA DRC612N

1. Turn on the player without any disc inside
2. Enter the code "321 789 456" before the player menu appears
3. Select 'all' in the appearing list for regionfree
4. Turn the player off

RCA DRS7000N

1. Turn on the player while disc tray is open
2. Go to the "Options menu"
3. Press 8, 2, 1, 3, X (replace X with 1-6 or 9 for multi region)

RCA RC5215P / RC5220P / RC5231Z

1. Enter 738565250001000X, replace X with the desired region or 0 for multi region
2. Press INFO

RCA RS2030

Turn the player on with no disc inside
1. Wait for the menu to load
2. Press INFO
3. Press 0, 2, 8, 3, INFO

There must be a fault in the screening of the internal wiring to the scart outlet in the home theatre system. I simply changed the way the player was connected to the TV and the interference disappeared:-

1.) I used the RCA video outlet instead of the scart lead. Picture quality was not compromised. FYI the Panasonic Plasma TV I have has only RGB video input sockets at the back, so I used a scart to RCA adaptor to overcome this problem of connecting old technology to new.

2.) The surround sound when playing DVDs is generated directly from the home theatre system so there was no need to connect the audio from the home theatre system to the TV

3.) I used a pair of RCA leads to connect the "audio out" from the TV to the "audio in"on the home theatre system to provide the option of TV sound through the home theatre system.

Turn off and disconnect power from unit. Check laser shuttle worm gear, look for dirt or hair (as I found). Remove with tweezers carefully. Check lubrication of worm gear shaft. If gone or worn, use white lithium grease to lube (very little). Play music CD 2 - 3 x. Than DVD. Worked for me.

Hi,
are you trying to play DVDs from a different region ?
PC DVD Drives, are region set to the computer, if you have a region 1 dvd drive, trying to play region 2 dvds et,c. it won,t let you. theres a couple of ways around this. go to Afterdawn ( on the web ) and download a region free dvd device.
Solution 2. try to obtain any updates or re-install windows media player. suggest player version 9 or above.

Mike @ compurepair.

p.s finally is to check that your drive, indeed supports DVD Or certain types of dvd media. i.e DVD+ Or DVD- some only support One type.