This provision must be there with its menu options. Turn it ON and suf through to get the timer option. Make necessary adjustments to data values there. Set it to 'Zero'.
SOURCE: broken remote, want sleep timer
Only if you can do this in the the menu from the front of the set. Some will let you but others do not include this in the menu . Then a remote will be the only way . You can go to www.replacementremotes.com to see if you can purchase a remote for your set . Good luck
SOURCE: where is the 470mfd filter cap on a sanyo avm 2053. what circuit
It should be on the main power board, near where the power cord plugs into the set. It will be quite a large cap, you can check its value by reading the value on the side of it, ensure the you replace it with the same value cap.
SOURCE: I have a SANYO model # AVM 3659G, Wont come back on
Hi, that probly a power supply plroblem, or a high voltage regulator and the horizontal transistor that drive the high voltage transformer at a high frequency (15.000 hz )if you think you can trouble shoot that ok; if not ask a friend who you no he nows about trouble shooting in tv. or you can go to a repai r shop should not cost to high half hour + parts
Beware high voltage in there(30 thousand volts
hope that help you
SOURCE: Loud buzzing sound on Sanyo AVM 1909
I had a problem like that so I disabled the tv's onboard tuner (input source)and now we use the cablebox's video and audio out to the video and video in jacks on the TV this will work as long as you have a cable box or sat reciever for your video and audio source and of course your TV must have video and audio inputs so it will work.
Good luck Rich
386 views
Usually answered in minutes!
×