Power outage lost fetaures

Try These

Do F983
-If F983 states PASSWORD then system has defaulted and you have lost ALL programming, call tech/vendor in to re-program.

Do F903
-If F903 states Fetaure Codes then say OK to all.
The system has defaulted and you have lost ALL programming, call tech/vendor in to re-program.
Try F903 and say OK to the Codes

-Do F9*1 and see what the F codes really are.

-Make sure system is properly connected to the KSU.

You should be calling in a tech/vendor when you have a system down.

Since You do do not give the phone model number I can only give you the link to the Uniden webpage where you can find links to all UNIDEN Cordless phones (900MHz, 2.4GHz, and 5.8GHz).

The DECT6.0 models are on another page: Click the downpointing arrow near the top of page to unfold the list of available products.

Follow this link to download your manual.

Hope this helps,
Tom S.

I would probably look at the internal fuse that protects the power supply inside the tv. The storm probably sent a power surge through your outlet, your breaker may not always work correctly, especially if the breaker is old. The fuse should be inline with the hot side of the AC power to the power supply circuit. You would have to open up the tv, but you would be able to spot the fuse very easily. Fuses are cheap, but getting to it may be a problem

Hi,
In most cases you just have to reset your modem and/or router, to do this just unplug the modem for the mains for 2 minutes, plug it back in and wait another 2 minutes for it to settle down, then you can try to reconnect to the server.



Regards.

make a new voice recording to the answering service followed by beep to record message.

Sorry about that please post your comments here so that I can read them.

http://www.retrevo.com/s/GE-29871GE3-review-manual/id/512ag022/t/1-2/

Get remote access code from the machine get it by pressing set up button on answering machine. Go to another phone when machine picks up enter access code then enter *7 record new message press 5 when done then to end call enter *9

I know this was posted 2 years ago, but I'll try to answer the questions anyway.

1) By itself, the AT&T 960 telephone does not have the ability to forward calls. That would be a function of your service provider (or in this case the PBX that it is connected to).

2) How to forward calls varies from PBX to PBX. You would need to speak with someone who administers the telephone system.