Hello Guys, I bought a PL 13088 watch, but I am facing difficulty to set the time. I would like to know; 1) What are those 3 dials for ? 2) How to set the time 3) Use of "Time Setting" button When I pull the crown (Eg: left crown); I could adjust only left dial. The same for right dial (using right crown). I could not find a way to adjust middle dial. When I press the crowns, the middle dial needles are moving; looks like it is minute & hour needles. Could anyone help me out please.. Thanks/ Anoop
The three dials are for three different time zones, there is no minutes or seconds.
to adjust the middle dial just push the small bottom which is located on the back side of the watch
Hey !
I don't understand, i have same watch but i can't set the time for middle dial. I push the back button ...and now what ?
SOURCE: Hi team, I have brought a
Yes there is. If you follow this link, then you should arrive at the information you need. http://www.police.it . Click on "others", then on "Dealers and Stores".
On the next page fill in the boxes and you will be given the addresses of dealers in India, who should be able to help you.
SOURCE: i have a police chronograph watch about a year old
hi,
all you need to do is pull the centre bezel out (to where you adjust the time) and by pressing the top button the chronograph needle will move round. Once it is the correct place simply push the centre bezel back in.
Hope this helps.
Duncan
SOURCE: hi - i bought a
You can email Police for the warranty information here http://www.police.it/contatti_eng.php/n=1
Hi,
Hope this will helped you fixing the time of your Citezen divers watch. Just foolow the instruction below.
Change your Citizen watch's time zone without actually moving the clock hands. On the digital display, change the city that displays on the watch, which sets the time to the different time zone. The Citizen also has a calendar, timer, chronograph and LED lights. Since it is an Eco Drive watch, it is solar powered so you never have to replace the batteries unless its backup power source dies.
Difficulty: Easy
Instructions
Pull the setting knob (crown) out one "tick" for setting mode.
Set the mode hand to "WT-S."
Pull the crown out one more "tick."
Press the top button on the right side of the watch for the city setting mode.
Press the lower button on the right side to "SET" the city.
Turn the crown to select a different city, which changes the time zone.
Push the crown all the way back in to finish setting the time.
Thank you for using Fixya.
1,661 views
Usually answered in minutes!
×