The binoculars marks when i take a photo with snap boton, and marks when i take a video, but when i connect the binoculars using the usb cable, and i try to transfer the pictures, i receive messages that the device hasn't be formatted. Then i give formatt to the sd memory, i take pictures again and when i try to download my pictures into my pc, the same problem appears. I wonder why the binoculars
registred the photos taked in the sd, but when i connect the binoculars to the pc, it can't read the sd memory. I try with other pc and with other usb cable, and the same occurs.
Please, help.
Thanks.
Take your sd card and see if u can just plain drap and drop anything into it...while its pluged into the puter. text , pictures ...its just a storage device, then try to read it back. if so your sd card is fine, if in dought u can go to wallmart and plug it in at the camerea department free just to review your pictures..if nothing on it your card or write is bad on the binoculars,also dont use there software treat it as exrernal hard drive. like f or g or h
select my computer and look for it then see if can find your pictures. if so u can drag all out to a folder on your c drive
crazylarry
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
First make sure you have the correct USB drivers for your phone installed on your pc. Go to device manager and see if your phone or mass storage device is listed. If not, download the drivers here, http://www.samsung.com/us/support/downloads. Make sure debugging on your phone is enabled. Please refer to the following:
To set the Samsung Galaxy S2 to USB Mass Storage (MSC) mode, go into "Settings > Applications > Development" and enable "USB debugging".
Then drag the status bar down and tap on "USB connected".
The "USB connected" screen with the large green Android icon will appear. Tap on "Connect USB storage".
A confirmation dialog box will appear. Tap "OK". The green Android icon will turn orange, indicating that the phone is now in USB Mass Storage mode and should now appear as USB disk drives in "Devices with Removable Storage" and be assigned drive letters.
Samsung Galaxy S2 (Android 4.0)
To set the Samsung Galaxy S2 to USB Mass Storage (MSC) mode, go into "Settings > More... > USB utilities" and tap on "Connect Storage to PC".
Then plug the USB cable into the device and connect to your computer.
The "USB connected" screen with the large green Android icon will appear. Tap on "Connect USB storage".
A confirmation dialog box will appear. Tap "OK". The green Android icon will turn orange, indicating that the phone is now in USB Mass Storage mode and should now appear as USB disk drives in "Devices with Removable Storage" and be assigned drive letters.
Samsung Galaxy S2 (Android 2.3)
To set the Samsung Galaxy S2 to USB Mass Storage (MSC) mode, go into "Settings > Applications > Development" and enable "USB debugging".
Then drag the status bar down and tap on "USB connected".
The "USB connected" screen with the large green Android icon will appear. Tap on "Connect USB storage".
A confirmation dialog box will appear. Tap "OK". The green Android icon will turn orange, indicating that the phone is now in USB Mass Storage mode and should now appear as USB disk drives in "Devices with Removable Storage" and be assigned drive letters.
Samsung Galaxy S2 (Android 4.0)
To set the Samsung Galaxy S2 to USB Mass Storage (MSC) mode, go into "Settings > More... > USB utilities" and tap on "Connect Storage to PC".
Then plug the USB cable into the device and connect to your computer.
The "USB connected" screen with the large green Android icon will appear. Tap on "Connect USB storage".
A confirmation dialog box will appear. Tap "OK". The green Android icon will turn orange, indicating that the phone is now in USB Mass Storage mode and should now appear as USB disk drives in "Devices with Removable Storage" and be assigned drive letters.
ALTERNATE WAY TO TRANSFER PHOTOS AND VIDEOS TO A COMPUTER If your photos and videos are stored on the memory card, then remove the memory card from the camera and insert it into an USB memory card reader. Connect this USB memory card reader and memory card into the USB port of your working computer. Your computer will see this as an USB Mass Storage Device or an external storage device; you can then open the folder on the memory card and copy the photos to your computer. Memory card reader is a handy device and is inexpensive. You can copy photos from other cameras and you can also download photos off your memory card to someone else's computer without the need of installing any programs.
With the supplied USB cable, when connected to the computer's USB port the computer should see the camera as an external storage device. OR ALTERNATE WAY TO TRANSFER PHOTOS AND VIDEOS TO A COMPUTER If your photos and videos are stored on the memory card, then remove the memory card from the camera and insert it into an USB memory card reader. Connect this USB memory card reader and memory card into the USB port of your working computer. Your computer will see this as an USB Mass Storage Device or an external storage device; you can then open the folder on the memory card and copy the photos and to your computer. Memory card reader is a handy device and is inexpensive. You can copy photos from other cameras and you can also download photos off your memory card to someone else's computer without the need of installing any programs.
Your PC is seeing your camera memory as USB mass storage and this is OK. Nothing is wrong with this. Follow the screens and you will see that the computer will see your camera as USB mass storage, and when you open the folder on your computer the camera pictures will be there.
Windows is set up to see cameras as USB mass storage devices for simplicity, so your computer can accept pictures from any camera that connects by USB without needing special software.
If this bothers you, most cameras are sold with their own special software that starts when the camera is connected. Check your users manual and follow the instructions for installing or downloading the software.
Either connect to computer with USB cable or use card reader for Sony Pro. You may have to update your system to current or newer than 3.8xx. Once files are in .mp3 or jpeg they can be transfered just like a "mass storage device". I have also used Nero to some conversions mostly to transfer/convert video files. A description is in the help files on your PSP. Updates are free and available on the Sony PSP site using either a PC or your PSP using wireless acces to Internet.
Are you connecting your phone as a Mass Storage Device?
From the home screen, attach one end of the Motorola Original
Enhanced USB cable to your phone and the other end to a USB port on
your computer.
On your phone, press Yes to use the phone as a portable USB storage device. Note: When connected as a storage device the phone cannot perform regular phone activities. Disconnect to resume normal operation.
On the PC, open the My Computer window and find where your phone displays as a MassStorage icon. Double click the MassStorageDevice icon.
Drag and drop files between your computer and phone.
When finished, remove the phone safely from your computer. Right click the "Safely Remove Hardware" icon at the bottom of your computer screen, then select "USB Mass Storage Device" and click Stop.
Select USB Mass Storage Device and click OK. Now it is safe to disconnect the cable. When the cable is disconnected, the phone restarts
What you have to do to put files on your computer or take them from your computer onto your phone is: go onto settings, onto phone settings, onto USB settings and chage it to either mass storage (if you want to put pictures, music and videos on) or media player (to just transfer music). Then plug in the USB cable that came with your phone into your computer/laptop and follow the instructions from there. NOTE: This only works with the Sampsung G600
Problem is unit will not work with an SD disk over 512MB. For some reason if the SD Card is 1GB or larger you will receive the message the card needs formatting. Verified this after many hours of trying to get 1 and 2GB cards to work. Used 512MB cards or less and the camera works perfectly. Originally got this info from a tech support facility that does support for Bushnell.
×