SOURCE: my gemmy brand light show christmas tree not working........
When you press the reset button on the controller box, then you need to press the small recessed button on the back of the remote control. You'll need a pen to get in there, or better yet a paper clip. That will reset the remote.
SOURCE: Gemmy trio light show tree
i bough mine used it came with a remote. after you plug it in you have to push the reset button on the big box untill the led on top flashes then push the rest button on the back of the remote(with batteries already installed of course). The led on the box will stop. then turn remote to on and push a button. that should do it, I hope.
SOURCE: we bought the Gemmy Christmas tree trio last year.
Press reset on the top of the main unit under the middle tree. The light will blink. While it's blinking, use a pin to press in the reset button on the back of the remote. The blinking light should go out, and you should be good to go. FWIW - I just looked for almost an hour before I found this answer today on-line. It worked for us.
SOURCE: i can't get my gemmy amazing light and sound show
Did you figure it out b/c I lost my remote and trying to figure out how to bypass the remote as well.
SOURCE: Gemmy inflatable band light show 10ft
inside the box is a fuse it blew so you have to change it
326 views
Usually answered in minutes!
×