I have the same TV and I tried both possible solutions... unplugging for 1 minute (even longer) and holding down the reset button on the remote while holding down the power button on the TV... Still same problem... Unable to to turn TV on. Can someone help? Please... Thank you!
I have the same TV and I tried both possible solutions... unplugging for 1 minute (even longer) and holding down the reset button on the remote while holding down the power button on the TV... Still same problem... Unable to to turn TV on. Can someone help? Please... Thank you!
This worked, I had tv unplugged for 24 hours plus, tv worked great. Turned it off and now it won't come on. I'm wondering does the tv get hot? tubes or circuit board ? Sony FD Trinitron WEGA KV-32HS510 32" TV.This worked, I had tv unplugged for 24 hours plus, tv worked great. Turned it off and now it won't come on. I'm wondering does the tv get hot? tubes or circuit board ? Sony FD Trinitron WEGA KV-32HS510 32" TV.
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
6 times blinks shows error of Low +B, OVP/ OCP Replace IC6501 & IC8002 [ MCZ3001D ] on D board. If you are handy with electronics stuff repair and can solder parts in circuit board then replace above said ICs or call local TV tech to do the job. Thanks.
I
have over 10 years experience in electronic tech
support.
I
know this isn't what you want to hear, but the problem you've
described can't be fixed with troubleshooting.
Your TV
will have to be repaired. There is a part that has developed a defect
and needs to be replaced. If you're still in warranty, the TV will be
repaired at no charge to you. The warranty would likely be at least
one year from the date of purchase from the manufacturer. If you
purchased an extended service
plan
they will repair the TV at no charge as well.
If the TV is no
longer in warranty, it will likely cost a minimum of $150 parts and
labor. This is assuming that you only need one circuit
board
or small part. If the problem is more than one of the circuit boards,
the price of repair could go much higher.
I hope I've provided
you useful assistance and that this information allows you to make an
informed decision as to how to proceed from here. Please be sure to
vote on my response. I hope I've earned a good rating from you
today.
Please let me know if I can be of further assistance.
7 times blinks shows problem in Horizontal Deflection stage of tv and possible defective part can be Horizontal Output Transistor or Fly back Transformer.
If your are qualified tech person then go ahead to check above parts.
If the blink repeats the same number of times (up to 6 or 7) between pauses, the number of blinks is a trouble code. Determine that number (count), then search this site and the web for your TV model and that code. Also look on the rear of the set for the chassis number, and search on that keyword.
I have the same TV and I tried both possible solutions... unplugging for 1 minute (even longer) and holding down the reset button on the remote while holding down the power button on the TV... Still same problem... Unable to to turn TV on. Can someone help? Please... Thank you!
This worked, I had tv unplugged for 24 hours plus, tv worked great. Turned it off and now it won't come on. I'm wondering does the tv get hot? tubes or circuit board ? Sony FD Trinitron WEGA KV-32HS510 32" TV.
×