Question about Dryers

2 Answers

I have a kenwood kvt1w tumble dryer that wont heat up. how can i fix this?

The dryer still spins around and the lights go on, everything works apart from it wont heat up now, what can i do?

Posted by Anonymous on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Dryers Master
  • 66,248 Answers

Call a repairman

Posted on Aug 25, 2015

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Dryers Master
  • 6,289 Answers

At least 7 things that could cause it not to heat. Heating element, improper voltage, thermal cutoff, high limit thermostat, operating thermostat, timer, and motor. Probably time to call lol cal competent service person.

Posted on Oct 28, 2017

Ad

4 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Jimster

James Greene

  • 240 Answers

SOURCE: Manual for KVT1W

http://www.espares.co.uk/parts/tumble-dryers/kenwood/kvt1w-1123-547-15000/p/1088/435/0/631602

Try this site and see if they can help you out. I would imagine that you are overseas somewhere, can find anything washer or dryer type for Kenwood here in the states. Let me know if they cant help you, will do a little more looking for you. JIM

Posted on Nov 22, 2007

Anonymous

  • 1 Answer

SOURCE: How do I fit a new drive belt for my Kenwood KVT1W Tumble Dryer

Remove the piece of angle iron from the top back of the LG DLE2514 and slide the top back. This exposes the screws holding the control panel on.
The control panel is held on by two screws, but they are at an ackward angle. The pannel has plastic tabs, when disengaged the panel pulls up.
There should be enough cable to set the pannel on top of the machine without disconecting anything.
Taking off the front pannel is easy at this point. Under the control pannel are four screws holding the front on. The Door has two screw holding it on and two alternates on the other side. The last two screws are at the bottom of the door opening.

Posted on Jan 24, 2009

wiringlunati

Charles Reifinger

  • 576 Answers

SOURCE: where is the driver belt for kenwood tumble dryer

It is a long, narrow belt that runs from the motor underneath up and around the drum. You should be able to find an exploded view at www.appliancepartspros.com as long as you have the complete model number. Good luck.

Posted on Mar 10, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why portable dryer heats but does not spin?


Open it up and check the belt inside. A belt is around the drum and around a pulley at the motor. If it is broken or has slipped off, then it wont spin.

Jan 18, 2016 | Dryers

1 Answer

I have a dryer which stops spinning some times, I have to manually spin the drum for it to start again. This may happen several times during a cycle.


I assume you mean it still heats fine and everything? Tear it apart and see if the belt is in good condition and routed properly and that the pulley spins easily. If everything checks fine maybe you just have some bad spots in the motor. Good luck.

Apr 06, 2011 | Fisher Dryers

1 Answer

Cylinder wont spin. dryer heats up and everything seems to be working fine, but it doesnt spin. how can I fix this?


sounds like the belt drive has snapped. you can buy a new one for around £15-£20
try www.e-spares.co.uk

Dec 02, 2010 | Dryers

1 Answer

The heat will not engage


Try to check the fuse sometimes depending on the dryer the fuse will go out and stop all heat if that is the case all you have to do is replace the Dryer fuse

Jul 13, 2010 | Amana NGD5200TQ Dryer

4 Answers

Electric dryer doesn't heat.


Probably a bad heating element. There are a few different styles, you'll just need to lookup your model number on an appliance parts website, find the right part, and then do a quick search on replacement. There are probably ten or fifteen websites that have instructions to replace heating elements.

Here's one where you can buy the part, the element is part number 17.

http://www.appliance-parts-warehouse.com/whirlpool-parts/Whirlpool-Dryer-Parts/Whirlpool-Parts-LER3624EQ1/Whirlpool-Parts-81777.cfm

Jan 15, 2010 | Dryers

1 Answer

Dryer doesn't spin


Look around for stiff wheels, bad bearings, glides and idlers. Its a good idea to oil the rollers with some temp resistant oil such as zoom oil. Dont use WD40 as this stuff is highly flammable and may cause a fire.
Some previous repair PICTURES


If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

Oct 08, 2009 | Whirlpool WED5100SQ Front-Load Electric...

1 Answer

Model WED5300SQ0 not heating and timer not working


Well with moving it around and all it could have any number of things happened. If it wont tumble, no lights, no heat or anything check that the plug has 240volts to it. then check the wiring going into the dryer may have broke wires or anything like that. but I would check the plug first if it has no power what so ever. If you check the plug and it doesn't have power check the breaker to see if it is tripped.

Sep 03, 2009 | Whirlpool LER5636P Electric Dryer

1 Answer

Power on but it won't spin.


You have a broken drive belt. To access the belt you have to remove the back metal cover.
The no heat problem could be a heating element or safety thermostat. These are also located under the back metal cover.

Jun 02, 2009 | Maytag Neptune MDE5500AY Electric Dryer

1 Answer

Dryer not heating, Interimittent Problem -------------------------------------------------------------------------------- Having an intermittent problem. The dryer turns on, drum spins, but you have no...


Have you tried to bypass the hi limit switch or the thermal switch. It will work. If it works for a few times, then you will know the switch is bad. I did this on a friend's one time and it solved it. Only cost about 15 bucks. Godd luck and let me know how it turns out.

Jan 13, 2009 | Whirlpool LER5636P Electric Dryer

Not finding what you are looking for?
Dryers Logo

Related Topics:

167 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dryers Experts

Marvin
Marvin

Level 3 Expert

85222 Answers

jimorris77

Level 3 Expert

411 Answers

Brad Brown

Level 3 Expert

18157 Answers

Are you a Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...