Office Equipment & Supplies Logo

Related Topics:

Anonymous Posted on Jan 19, 2009

My printer doesnt recognize the color magenta it only

  • Anonymous Jan 21, 2009

    i used to print a lot in the past. this problem accurs only this time.
    I already bought new magenta cartrige still doesnt work i have
    been to the refilling station twice for all the colors to be
    refilled before this problem occured . how dangerous for
    using refill colors

×

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.

  • Contributor 2 Answers
  • Posted on Jan 19, 2009
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Joined: Jan 19, 2009
Answers
2
Questions
0
Helped
325
Points
5

Was your printer detecting the earlier magenta cartridges which you used?? if yes.get another magenta cartridge and try again.problem with the particular  magenta cartridge. if no.get your printer replaced.its a hardware issue.

  • Anonymous Jan 24, 2009

    sorry for late reply.please do not go for refilled cartridges.always use branded cartridges.for hp printers always take care that the cartridges are of hp

×

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Magenta not printing cartridge color

Hi, try to open the color cartridge compartment and check if the head of the cartridge is making contact with the filter
1helpful
1answer

Not recognize yellow and magentadrum cartridges

they may be dry or old stock or out of ink , you need to replace them
0helpful
1answer

Hp c6180 states cartridges missing or damaged

OK now this might seem bizarre, but did you go ahead and click the "Black Only" print option?

I have a C6180. Just installed all new cartridges. Tried to print and got the message that Cyan is empty. Tried all sorts of things. Then out of frustration clicked the Black Onl option. Document came out printed in color! Double checked with a picture that has lots of cyan colors. It all printed too! Go figure.
0helpful
1answer

I replaced 2 cartidges. When I replaced the magenta the printer kept doing fine. When I replaced the black 20 minutes after the magenta it doesnt recognize the cartidge and I put another black cartidge...

Make sure there is nothing between the print cartridge and the place where it goes. Make all the plastic is removed from the cartridge. If you have a can of air, blow out the cartridge area.
0helpful
1answer

Hello, I have HP lj 2600n. It does not

the problem is due to scanner mirror dust.you have to clean the scanner mirror.
2helpful
1answer

The lt magenta and magenta just quit printing between pages

1. Check if the cartriges are correctly installed:
Installing the Ink Cartridges

2. Print a diagnostic page and clean print heads, using the printer cleaning utility:
Color Mix or Missing Colors on the Diagnostic Page
Repeat if needed.

3. If this still doesn´t solve you problem, try resetting the printer and manually cleaning the cartrigdes as advised in this FAQ:
Ink Cartridge is Missing, Incorrectly Installed, or Not Intended for Your Device' Error Message is Displayed on the Printer
0helpful
2answers

Printer won't recognize the new ink cartridge

Each cartridge has a electronic chip pre-porogrammed at the factory.
If it is a reputable store they will exchange for the right color as they can return the PM to Canon as defective,
0helpful
1answer

My printer still doesn't recognize magenta

Install not to worry, as on инстукции. This orderly
0helpful
2answers

BACK COVER OPEN

thetre is a sewnsor in the back door, make sure it is in the right position
0helpful
1answer

IP4300 only recognizes magenta OR cyan

1. Get compressed air
2. Run Printhead under HOT water, do not worry about contacts getting slightly wet.

3. Blow compressed air with straw attachment into screens where the cartridge nozzle sits on printhead. then let it sit and dry.

4. reinstall print test page

5. if this fails open paint/photoshop and print a page of the color that is not printing correctly. rinse and repeat until colors flow freely.

I have several ip4300s and I have yet to give up the ghost on a printer with a clog ujsing this method.
Not finding what you are looking for?

82 views

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

k24674

Level 3 Expert

8093 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66963 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...