Hi, This is me who from anywhere in Bangladesh. I have a printer that shows some critical errors. Error Code is 5B02. Some one can solve this problem?
SOURCE: Waste Ink Absorber is full In Canon Pixma IP3300
my printer say, "the ink absorber is full".
SOURCE: canon pixma ip4600 showing C610 error
The 6 flashes says that the inner cover is open, there is a switch on the right, inside that is pressed when the cover is closed. These switches fail quite often. You can try blowing canned air into the openings on the right side inside near the switch and opening and closing several times to clean the switch contacts, but this printer has no service or parts as it was exchanged for new during warranty and tossed after warranty runs out.
Testimonial: "Many thanks for that info....did as you sugested also a strategically placed piece of card to keep the inner door against the switch..all now working "
SOURCE: canon printer pixma mp110
My Pixma MP110 keep on displaying "CHECK PRINTER (5800)" Please have m to solve this problem
SOURCE: my canon pixma mp830 shows error code 5010. what
The scanner lock switch may be in the locked position. Lift the cover and check the slide switch located on the top front left. If this is not the problem, you will have to have a service center look at the problem.
SOURCE: error code U163 on cannon pixma mp220 printer
Those cartridges don't refill unless you have a way to reset the internal chip. Check online for refillable cartridges or a chip resetter. For priming you go into printer properties and choose maintenance and head cleaning, or choose cleaning from the front panel.
1,398 views
Usually answered in minutes!
×