Proscan PS32600 32" TV Logo

Related Topics:

Question about Proscan PS32600 32" TV

1 Answer

My tv wont turn on all it dose is beep when i pluge it in

When i pluge in my proscan modle number ps32600 made in 1998 all it dose is beep i have tryed plugeing in the cable all it dose is beep still if ne 1 know whats roung i woul like to know plz email me at [email protected] pleas and thank's

Posted by bob oneal on

  • HOTTRODD19 Nov 21, 2007

    I HAVE A PROSCAN PS35123FM1 IT WONT TURN ON WITH OR WITHOUT THE REMOTE

×

1 Answer

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 47 Answers

If you look on the back of the set, there will be a chasis # probably a CTC169 . These sets usually need to have the power supply repaired. These are great sets and have an awesome picture. There is a kit,I which is available to service technicians which will repair the power supply in most cases. If you can find a good local technician , they should be able to repair this problem for approx $125-150. if you have further questions pertaining to this set , I will be happy to advise you. I probably have repaired a coule hundred of these sets. This is one of the few old crt sets that are worth fixing. Scrivitron

Posted on Jun 25, 2007

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I Have a Frigidaire gas dryer that just beeps but dose not start Modle number FFLG1011MW

It is most likely the dryer's control panel or if that is ok the thermal limiter fuse has failed, is the dryer exhaust duct work clean of lint?
0helpful
1answer

How do I reset my proscan tv set modle number PLDED399A back to factory setting with my remote

There are two types of reset to TVs. The first is simple to do; a Hard Reset; and the other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight; will be better. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/
Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done.
0helpful
1answer

I have a 50 inch proscan and it just beeps but will not come on how can i fix it

I suspect wrong model number is listed here as this set makes no beep at turn on; older set made around 2000 but if it is your model here is some information to look at.

http://en.allexperts.com/q/TV-VCR-Stereo-1749/Proscan-PS50700-projection-TV.htm


If not this model let me know.
0helpful
1answer

Emerson -modle ewf2704 . tv went out no picture no sound wont turn on but when pluged in you hear a buzzing sound

My 55" LG did the same thing. Had to have tech come to my house and replace board. It is a factory defect in alot of LG TV not sure about Emerson
0helpful
1answer

None of the Proscan TV codes I have work In My COX universal remote

Than the COX universal remote dose not work with the Proscan tv.Try website like Remotes.com to buy the same exact to the original Proscan tv remote.
5helpful
1answer

Need a remote control code

hi,i had the same problem and found out that the samsung remote codes worked,try that.
0helpful
1answer

PROSCAN TV

Hi

the ticking sound is coming out from the flyback that is high voltages!!! if you on the unit is there a picture coming out? or sounds coming out from speaker?

Thanks!

0helpful
1answer

Proscan PS61700 Beeping no picture

I have a 60in Proscan Projection TV. My picture is out and the TV only beeps.

Brian Allen
0helpful
1answer

Tv problem

what chassis is in your set,look at the rear panel for model and chasis type to help to diagnose fault
Not finding what you are looking for?

258 views

Ask a Question

Usually answered in minutes!

Top Proscan Televison & Video Experts

Jaime Hernandez

Level 3 Expert

2351 Answers

matt martin
matt martin

Level 3 Expert

1259 Answers

Cindy Wells

Level 3 Expert

6650 Answers

Are you a Proscan Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...