Okay, When I first got it out of the packet i turned it on. And then I turned it off so i wouldnt waste any battery. But then When i went to turn it on...it wont turn on! So i left it in the computer to charge but nothing happens!!!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Are you sure that you are using the correct key?
Did you recently separate/divorce from your partner/spouse?
Did the ex-spouse have the car "rekeyed", so that the "old" keys no longer work?
check the battery cable for a good connection then make sure its in park move the gear shifter around and place back in park. check the head lights for full power. last thing is jump it with cables to make sure the battery is strong.
I have the exact same problem and i still have no idea what to do with it i tried changing the batteries and everything but it just wont turn on there are no lights where you change change you settings and i can't take any pictures with it someone please help
You need to try Silica Gel Packets. There was a good article on associatedcontent.com that explains how to dry an iPod, MP3 player, cell phones, or any electronics. You need to place your device in a zip lock bag with Silica Gel Packets. Silica Gel will remove all the moisture from the phone and its components, something air drying will not do! Just Google "Silica Gel Packets" and you will find several companies selling these products. There is also a web site called: http://www.SilicaGelPackets.com that has them.
If I rember correctly a E013 error code means that there is something causing a drag in the copier. Do you hear a clicking sound before it codes out? I would look in the fuser unit and see if the cleaning web is wraped around the upper fuser roller or if the Lower fuser roller is cut and causing the fuser not to turn. If that turns OK, I'm almost sure you may have a packet waste toner aurger or waste toner tube is cluged. If that is the case you will have a packet AP kit... Good Luck
my sansa froze up and wouldnt turn off or on and i had to wait for the battery to die and wen i turned it back on it was the same thing again...so i took it in and they replaced it but that was 2weeks ago and now its not working at all...wont turn on nothing...i worked just fine i turned it off plugged it into my comp for an hr wen to turn it on and now its dead....
im begininn to think these are a waste of money and time...
same thing happens to my one
×