I believe the problem has something to do with the aspect ratio. The top and bottom of the screen is cut off. I have tried adjusting with the "aspect ratio" button, but cannot seem to shrink the whole entire screen. Any suggestions or solutions?
An expert who has achieved level 2 by getting 100 points
An expert that got 5 achievements.
An expert who has written 50 answers of more than 400 characters.
An expert whose answer got voted for 20 times.
Re: Hitachi Ultravision LCD Rear Projection
Normallly, if the format button on the remote for the television does not achieve the desired affect, then, a cable box or a satelite box is where the change needs to be made.
A Motorola Cable box needs to be set up to go to a wide screen when an analog signal is detected.
It's difficult to determine the repair without knowing the hook up of the peripherals.
Hope this helps.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Press the "Aspect" button on the remote until the picture looks appropriate. You are probably trying to display a 4:3 ratio channel on your 16:9 ratio TV. You are probably viewing it in "zoom" mode, which does not stretch the 4:3 ratio video, but enlarges it until it fits the width of the screen, which zooms part of the video off the top and bottom of the screen.
check the aspect or ratio settings there is a button on the remote called aspect, ration, pic size, or something simmilar you need to push. if you have satelite tv, it can also be the format button on that remote
It sounds as if the aspect ratio is not set properly. On the original remote there is a button labeled "aspect".
Try pressing it and see if you can choose a selection that will make the picture fit. Thanks for using fixya.
Not sure but you might be confusing your aspect selection on your DVR with aspect selections on the tv itself. Make sure you use your hitachi remote & check all available aspect ratios. Find one that suits u best
On your remote there should be a button that says "Aspect" or "Pic Size". Press thisuntil the video fills the screen. If you do not have the remote of don't have the original remote, this setting can be found by preesing the menu button on the tv, go down to video settings and it should be listed under "Aspect Ratio", change it untill the video fills the screen.