Hi, My Jitterbug flip phone will not charge up.
Do you know anyone with a similar Jitterbug?
It would help tremendously if you would try charging your battery in someone else's charger.
If the battery charges then your charger is the problem and not the battery. Useful to know.
I am assuming you have wiped all the contacts with alcohol or contact cleaner, to remove any thin film that might be interfering with electric conduction.
Quite often that persistently blinking charge light indicates a battery that has reached the end of its useful life.
If you buy a new battery be certain to charge it at least 14 hours before you ever put it into the phone.
I repair a lot of digital cameras, watches, cell phones, etc. And contacts that need cleaning or degreasing are quite common.]
can't seem to hear the person on the other line
It wont switch on. Its DEAD....
Its Astralian made... Since warranty cant be Claimed..
Can some one suggest whats the problem???
My unit turned a year old last march. I had no problem with it until recently. First, the phone would just reset in the middle of a call. After a few days, the battery was drained zero. When I tried to charge it, it won't charge. I tried to replace the battery twice but both batteries just don't get fully charged even after being plugged for more than 3 hours. It can be switched on at times but that's all about it.
it switches off while talking suddenly. charge for whatever amount of time it will switch off. you can again sitch it on but wont be able to talk. the battery drains. whats the problem?????
My phone's reminder went off in the middle of the night. i got up and turned "all reminders off" when i went to turn it on in the morning it would'nt turn on so i thought it was flat so i plugged it into the charger and nothing happened we've tried everything it just wont work.
has anyone had the same problem???
if you have HELP ME!!!
how to power on my motorola v6, dead set and cannot be charge.. how to power on my unit? battery is good by testing of any devices.. how to reprogram my unit? or to open it so that i can update in suite..
×