Problems!!!!!!!!!! Help.. When I turn on my camcorder the LCD is blank. The whole LCD screen is white. I havent dropped it or anything and the viewfinder works fine along with other functions.

It sounds like you may need a new LCD screen or lens. I'm having similar problem with a white LCD screen on a Canon camcorder, but it still records video, I just can't see what's in the frame or access menus. Does yours still record video? If so, it is the LCD screen.

It might be flex internal wire connecting LCD with camcorder. I had problems like this changed it and it's like new.
got it from the repair shop.
Good luck
Meggita

press the reset button

check whether can see the picture through vew finder,if yes replace srtip wire from main board to lcd bord

Is it white or dark?

If blank white, then the cable needs to be reset if dark then the lcd screen needs to be replaced. They are easy to change and run about 35 dollars for the whole assembly.

Here is a guide for that

Sidekick 3 LCD replacement guide

and here is a link to see what is availble on ebay:

Sidekick 3 LCD Screen

Hope that helps

It seems to be ur lcd stops working..Take this to service center...

does the screen turn white or does it not turn on at all?If it turns white you can try a few things like take the battery out let it sit for 5 minutes then put it back and try it out,or you can open the top housing and find the flex cable connection unplug it plug it back in and try it,If the screen isnt comming on at all you need to check that the flex cable is connected if it is your lcd is defective and will need a new one,or your flex cable is bad,I dont know how you would know what one it was without having another phone to test them in but those are the only options for that scenario,well good luck

Go to www.samsungclassaction.com for more information

Sorry to hear that!
The only thing I would sugest is to pull the battery (and leave it out for 24 hours (or longer)) to try to reset the camera. But I would guess that the LCD stoped working and the white screen you see is the back lit screen mounted behind the LCD.

it seems like the cable from the lcd to the phone mabye loose or you NEED A NEW LCD,,,
i HAVE WINDOWS MOBILE 6 ON THE MDA AND I HAVE A LOT OF PROBLEMS