An expert who has achieved level 2 by getting 100 points
MVP:
An expert that gotĀ 5 achievements.
Governor:
An expert whose answer gotĀ voted for 20 times.
New Friend:
An expert that has 1 follower.
Expert
129 Answers
Re: power won't work
Ac power jack broken solder joint at this connector , or fuses on power supply board . optic, need to be replaced. just the optic cost around 60.00 let me know
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Check the cigarette lighter fuse. This is what powers the DLC. If the fuse is good, check and see if the lighter works. If not, you have a bad wire. Code readers have to have power from the car. Most scanners have there own power and will read the computer, unless the data wire is bad or the computer is bad.
reset the dryer .disconnect the power cord by 30 -40seconds, and try again, if the problem persist with the error, read you owner manual in troubleshootign section. or dwonload the owner manual for identify the error problem, can be problem a temperature. go to www.retrevo.com
Hi sir.
After reading his problem.
Please do the Maintenance and LUBE,
The error # 9 mean that thinking. [email protected]
cell+whatsAPP:+50588611441 How To Lubricate Treadmill
see this causes and fix it. God bless you Reset the code read your instr. manual
If the coffee maker doesn't work at all, make sure power is on at the outlet, check the electric cord, the internal fuse or the thermostat and heating elements replace as needed.
reset the error code and read your instr. manual. God bless you proceed according. If the coffee maker doesn't work at all, make sure power is on at the outlet, check the electric cord , the internal fuse or the thermostat and heating elements replace as needed.
Place an empty disc in, format the disc, record a little scene. Turn off camcorder. Place the error disc in the camcorder, turn on the camcorder all the way to play/edit. If this doesn't work turn it to record and try to record. Worked for some of my error disc
Its hard drive fail. on a wright error cannot read the file. hard drive will need replacing or re formatting can happen with power cuts so would check the cpu aswell.
×