One cdj and one turntable

Make Sure Yo Have the timecode cds and the 800mk2 is one of the best controller for serato and dont use the master tempo on the cdj if you have the latest serato firmware it should have it on there!

Chances are you have a defective laser mechism assembly as the error your getting is a focus and tracking error from the assembly

Hi there,

Please try http://www.rane.com/pdf/sl3quick191.pdf

Regards,

Anirban Mazumdar
http://www.ikarmatech.com

You have to hook up the SL1 Box or the 57SL mixer and then install the drivers. If you are not hooked up to either of these it will say 'Interface Disconnected' or 'Soundcard Not Found'.

http://www.radioshack.com/product/index.jsp?productId=2102978

http://www.radioshack.com/product/index.jsp?productId=2102977

What you need is one of each of the RCA Y-adaptors like at the above links. Radio shack probably has non-gold cheaper ones in the store. on the one that is radio shack model #42-2608 hook the two 'female' connectors to your turntable's red n white RCA outputs. then take the radio shack model 42-2609 and hook the two 'male' connectors to your serato. finally connect the two Y-adaptors together in the middle! This merges both channel but keeps them both equally going into your serato so that no actual musical info is lost.

It's the limitations of Serato. Because it's sampling in real-time, the signal cannot be manipulated by the CDJ800. Sorry, there is no way around this. Talk to Serato about this.

- OPTiC
DJ Equipment Repair Videos
DJ Equipment Repair
DJ Equipment Sales
Pioneer Parts

cdj

Well im having the exact same problem and cant for the life of me figure out why it wont work if you have a soulution please please please email me

[email protected]

Using pc onboard sound cards with serato scratch live

i have exactly the same problem, its annoying

1 thing which works is holding the button down then spinning the deck round, let go, turn off the scratch button, press play and turn on the scratch button again