Brookstone iconvert not saving getting errors

Most scahher have an option to determine where the output should go. I created a foled on my Desktop called "Scanner" and send everything from the scanner to, there.

If it worked fine then it can be made to do so again. Here is the "Brookwstone" site. http://brookstonemanuals.com/ Good luck.

change the format of the document to something the ipad can id (format: jpg, jpeg, an so on

1 On iPad goto Settings ->Privacy->Photos 2 Turn on iConvert Scan

1 on iPad gpt to Settings, 2 goto Privacy, 3 goto Photos, 4 turn on iConvert Scan

Try inserting another document to push the photo out

On iPad goto Settings-> Privacy -> PhotosTurn on iConvert Scanner

A search for that model on Brookstone's website takes me to the iConvert Instant Slide and Negative Scanner. That scanner does not require an installation CD. It works by scanning slides or negatives and then saving them to an SD card. Many digital cameras use SD cards so you may have one already. Otherwise an SD card will need to be purchased separately.

I scan a picture on my brookstone iconvert scanner there are white lines through the middle of the picture. Already tried recalibrating and cleaning.

The Canon support site is the place to go for that if your Manual does not tell you.
However remove the software and reload it - it may be as simple as that.