An expert who has achieved level 2 by getting 100 points
An expert that got 5 achievements.
An expert whose answer got voted for 20 times.
An expert who has answered 20 questions.
Re: Problem with temperature
You should try and open the printer up and let it cool down. Also, try to keep it in open places where there are windows and stuff, and try to keep the room cooled. Is it an old one? If so, there's no solution to that.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I think rain doesn't have anything to do, unless you had your printer outside...
Maybe a light interruption could make your station start over without proper settings. Try checking your printer driver and see if it has the proper settings for ribbon and not printing on black dots.
Blocked print head nozzles Inkjet printers need to be used frequently to prevent blocked print head nozzles. You may have blocked print head nozzles. Try the printer maintenance to clear the printer nozzles. After several deep cleaning attempts and there is no improvements in the print then a new print head is required.
you need to make adjustments in the driver control panel color options, you may need service to calibrate the temperature, this can also be a result of poor quality PVC cards. Some card design software will allow you print parts of the card with black panel only which would eliminate this issue.
Do you get any errors? 1 st unplug and plug in to reset power 2nd replace print ribbon with new one, could be bad ribbon or bad RFID tag on the ribbon 3rd try printing a different card if still not working i would recommend sending in for service. Contact MidWestIdSolutions.com for more info.
in order of most likely 1 edge to edge settings in printer tool box are off. 2. print ribbon carriage (blue part you put the ribbon on is bad) 3. Bad ribbon 4. dealer needs to service to calibrate print head temp tulsabiz.net for more info