Question about Standard Horizon Chart Plotter CP180 GPS Receiver

1 Answer

I am trying to delete all tracks/routes on CP180 Standard Horizon

I am trying to delet all the rtacks, routes and waypoints on the Standard Horizon CP180. They are all marked up, but I want to revert to a claer screen

Posted by wawwawhop on

Ad

1 Answer

Anonymous

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 379 Answers

Reading your owners manual (link provided at below) , i see you can delete / edit points one at a time or a faster way format the C Card.

** formatting the c card instructions >

1.) press MENU , move the shuttle point knob to highlight USER POINTS , and press ENT .
2.) move the shuttle point knob to highlight USER C CARD, and press ENT .
3.) move the shuttle point knob to highlight FORMAT ,
and press ENT .
4.) a popup warning window will pop up to confirm you want to format the user C card .
5.) select YES , and press ENT to confirm , (select NO otherwise) .
NOTE : formatting the user c card erases all files previously saved on the c card .

CP180 users guide

J5


Posted on Jan 17, 2009

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

I have a Garmin etrex10. It says, insufficent memory please delete waypoints and tracks. I have nothing saved. no waypoints and no tracks.

You may have two full copies of the maps. This happened to my old Garman. Go to options/navigation/maps and look at the list of what maps are on there. If you have two different copies, delete one of them.
May 02, 2019 • Garmin GPS
0helpful
3answers

I would like to delete one or more addresses without disturbing the rest. How? How can I edit an address?

I don't think you can delete the Address Book on the iQue, because the program resides in the iQue's ROM. Any programs that reside in ROM cannot be deleted.
Sep 16, 2008 • Garmin GPS
0helpful
4answers

Memory full, cant delete stored favourite destinations, sat nav turns off when delete is pressed.

Hello vinny!!

Perform a hard reset to clear all your memory!!!


Step 1. Turn your Nuvi unit off, remove any SD cards from the SD card slot and make sure that the unit is not plugged into any computer.
Step 2. Place a fingertip on the upper left hand corner of the touch screen and keep it there while turning the unit on, a prompt should read " Do you really want to start in maintenance mode?"
Step 3. Select the yes button.
Step 4. Enter your PIN if enabled.
Step 5. Main Maintenance Mode screen should have 4 selections:
System information
View Diagnostics
Clear User data
Clear Waypoints
Step 6. Choose "Clear Waypoints". After some time the unit should reboot.
Jul 12, 2008 • Garmin GPS
0helpful
1answer

How do you remove waypoints and routes from charts

do a soft reboot on unit and it will delete all the waypoints trails and routes
0helpful
1answer

Can it take ais?

Hello,
A Standard-Horizon CP180 Chartplotter can recieve information from an external AIS device with a NMEA data wire connection. The cable from the NMEA output of the AIS would be connected to "Port 1" (Page 18 of the CP180 user manual) on the CP180 and then the CP180 menu settings configured to show AIS targets, data, etc. (Page 21 on the CP180 user manual)
0helpful
1answer

How do i erase tracks on 525S

To edit an existing waypoint:Or MOB
1. From the Home screen, select Information > User Data > Waypoints.
2. Select the waypoint you want to edit.
3. Select Edit Waypoint.
4. Select the waypoint attribute you want to change (Name, Symbol, Depth, Water Temp,
Comment, or Position).
To delete a waypoint or an MOB:
1. From the Navigation chart, use the map pointer ( ) to highlight the waypoint or the MOB
on the Navigation chart.
OR
From the Home screen, select Information > User Data > Waypoints.
2. Select the waypoint or the MOB you want to delete.
3. Select Review > Delete (The Review button is only shown when more than one waypoint
is in the vicinity.)
0helpful
1answer
2helpful
1answer

Reboot

Hold the navigation stick and page button down while powering up. A dialog will ask if you want to delete all data. push yes.

A backup of your waypoints, routes, and tracks it nice to have if you wish to save them.
5helpful
1answer

Route waypoint memory full

from the main menu select FIND. Select WAYPOINTS, press the menu button ( bottom on LHS of unit) Select DELETE from the menu, choose what you want to delete ( e.g blue flag waypoints) and hit the enter button ( rocker on front unit). Good luck !
Oct 11, 2008 • Garmin GPS
0helpful
1answer

I've got a garmin E-Trex Vista CX and Mapsource software. After creating routes & waypoints (for Ben Nevis, Scafell Pike & Mount Snowdon) when I download these to the GPS unit each subsequent...

The contours are not coming from the routes and waypoints, they are coming from the mapping software. You must load all the map segments at once to your unit. You can upload routes and waypoints separately and they will not erase the other ones already on the GPSr unit.
Apr 21, 2008 • GPS
Not finding what you are looking for?
Standard Horizon Chart Plotter CP180 GPS Receiver Logo

Related Topics:

2,395 views

Ask a Question

Usually answered in minutes!

Top Standard Horizon GPS Experts

The Knight
The Knight

Level 3 Expert

76823 Answers

ADMIN Canada
ADMIN Canada

Level 3 Expert

43176 Answers

Tom Chichester

Level 3 Expert

62199 Answers

Are you a Standard Horizon GPS Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...