Question about Kodak Advantix T550 Auto Focus APS Point and Shoot Camera

1 Answer

Problems with camera display on kodak APS (something or other......)

I can take the picture but once taken every possible indicator on the display lights up and the camera jams. The only way I can get the shutter thing back down is to take the battery out and then close. When the battery is re-inserted the picture has actually taken and the display shows as it should. When the next picture is taken exactly the same thing happens. I have tried changing the battery but it makes no difference.

Posted by lynn jallands on

Ad

1 Answer

Anonymous

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I am having exactly the same problem (I have a T550). On the last film I shot, the only way to advance the film was to pull the battery out and re-insert it every time. When I printed that film, all the frames are blank! Kodak's FAQ about "clearing the logic" suggests a solution for that problem. 1. Turn camera off 2. Pull battery out 3. Turn camera on 4. Click the shutter approximately 6 times 5. Turn camer off 6. Repeat step 4 7. Reinstall battery I just tried that but the problem persists. I am now going to leave the battery out for several hours; maybe this will help. Otherwise, well it is time to bite the bullet and buy a digital !

Posted on Aug 03, 2007

  • carlotacalde
    carlotacalde Feb 20, 2012

    I have the same problem... i have a t550, i click in the shutter, and the camera turns off.
    The film is blank, i don't know was is wrong..

×

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0 Answers

Sd card will not display previous pictures taken-camera will not read

Oct 26, 2015 | Kodak Cameras

1 Answer

I cannot view pictures on my SD card on my Kodak c703.but can view them on an other camera.Any advice please
You only can view pictures shot in the same camera. Although a camera has a micro processor, it does not have the same viewing possibilities as a computer. Sometimes when you not even see your own pictures, shot in the camera, pressing the display button several times can help or putting the camera in viewing mode. If Notting works, and you even can see something on the display while shooting pictures, you have to fear the display is defect.

Mar 14, 2015 | Kodak Cameras

1 Answer

Iam unable to view the pictures I took with my former Easyshare. It says unreconized-file format. Is there a way I can view the pictures taken with my old camera?
Many cameras will not display pictures that were taken with a different type of camera. You should still be able to view those pictures on the original camera, a computer, or a digital photo frame.

If I may make a gentle suggestion, use your camera to take pictures. To display them, use something better suited for the task.

Jun 12, 2012 | Kodak Easyshare Max Camera Z990 Digital...

1 Answer

Camera shoes white display
Possible that the LCD is faulty or the main optical sensor - the CCD- is faulty.
Now check if the older pics or the loaded pics on the SD card are seen well on the LCD display. If so the LCD is good and the fault might be the CCD.
If not check the present pictures taken which are downloaded to the PC and is seen to be perfect. If not the CCD is fault which means that the pictures taken are totally white.
Get estimate from Kodak service before you open the set.

Jul 23, 2011 | Kodak EasyShare C143 Digital Camera

1 Answer

My camera will not read Kodak pics I put on the memory card, thay are ther as far as the kodak program and file manager are concerned, but the camera will not display them on its screen. The pics were...
Once the pictures have gone from the camera to the computer a different code or tag is used so the computer programing can read it it's a one way ticket from the camera to the computer hard drive but not back. Once the file is opened altered (by deleting images) the camera firmware can not read the file.

Jan 07, 2011 | Kodak Cameras

1 Answer

Doesn't take pic when button pressed. Rewound whole roll after only 2 pix taken.
Sounds like your picture button is faulty.

In Europe Advantics are supported by Johnsons Utopia, but I'm not sure in US.

Contact KODAK:
http://www.kodak.com/eknec/PageQuerier.jhtml?pq-path=14563&pq-locale=en_US&_requestid=3490

Oct 22, 2009 | Kodak Advantix 1600 Auto APS Point and...

1 Answer

Kodak camera will not stay open
Is the battery dead? Is the camera set to review the pictures?

Aug 21, 2009 | Kodak Advantix 3100 AF APS Point and Shoot...

1 Answer

Dont take any pictures
Change the batteries and try again.

Feb 12, 2009 | Kodak Advantix F620 Zoom APS Point and...

1 Answer

Canon Powershot SD 1100ES - display problems
My mother has this model camera. I believe there is a setting in the main menu that will allow an energy saving mode that sets the display time or no display. If not it's under warranty and your retailer should replace it if it is within 30 days of purcase date.

I hope this helps, goood luck!

Nov 20, 2008 | Canon PowerShot SD1100 IS Digital Camera

1 Answer

No picture display when taking shot. Blank pictures produced when shot taken.
Solution:
Ebay has used cameras (DX4530) for about $75.00 with shipping. Kodak's repair service for these cameras is done by mailing in the camera -- and the baseline starting price is about $140.
I'm planning to go to Ebay and buying from a seller with a good track record and reputation.

Mar 27, 2008 | Cameras

Not finding what you are looking for?

View Most Popular

Advantix T550 Auto Focus APS Point and Shoot Camera

  • Photography

Related Question

Sd card will not display previous pictures taken-camera will not read

  • Kodak Cameras

Open Questions:

0 Answers

Nikon FM2n Shutter fires when winding. I have a Nikon FM2n that has developed an issue that only happens when the camera hasn't been used recently. This can be a week or just over 24hrs. The issue is when you wind the film on - the shutter will automatically fire as if it was taking a photo which will result in a wasted frame on the roll of film. I have recorded a video of this happening and it is when you have wound the lever all the way on then when the lever is on the way back after the full function of winding the film on has been completed - the shutter will fire. When you go to wind it on again, it will behave as per normal.

Jan 20, 2021 | Nikon Photography

0 Answers

My mamiya 645 frame counter doesnt go back to S after removing the film back. I used my finger to reset it from inside the camera and worked fine.

Jan 19, 2021 | Mamiya Photography

0 Answers

Omnitech Digital Photo Frame 15242. Is there software needed?

Jan 12, 2021 | Photography

0 Answers

Pandigital frame. Why isn't it working? When I try to turn it on with or without remote it just flickers on and goes right off

Jan 29, 2020 | Photography

See all Kodak Advantix T550 Auto Focus APS Point and Shoot Questions

Related Topics

Kodak Advantix T550 Auto Focus APS Point and Shoot Camera Logo

Related Topics:

220 views

Ask a Question

Usually answered in minutes!

Popular Questions

1 Answer
Don't know what buttons on back of camera are for.

Kodak Advantix C400AF APS Point...

1 Answer
Cannot play videos in Kodak SV811 photo frame

Kodak 8" LCD Digital Photo...

1 Answer
Kodak pulse wifi problems

Kodak W730 PULSE Digital Frame

2 Answers
Current file is bad message keeps coming up. I have 130 photos,

Kodak EasyShare SV811 (8858946)...

1 Answer
Kodak EasyShare software won't connect to digital photo frame

Kodak EasyShare EX1011 Digital...

Top Kodak Photography Experts

Davit Mamyan
Davit Mamyan

Level 3 Expert

552 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Harrie

Level 3 Expert

6746 Answers

Are you a Kodak Photography Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...