Question about Canon PowerShot SD1000 Digital Camera

1 Answer

Cracked screen I order the parts to replace the screen. the camera worked before I took it apart. when I put it back together with the new screen it would not turn on. is there some reset button I must press? does anyone have any ideas

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 19 Answers

These units are so fragile that you are undertaking very skilled surgery. it maybe that somehting became unplugged or pressured on the putting back together. Now that you have done it once, I would suggest taking it apart again and just putting it back together, it maybe that it will work the second time! there is no reset button that I know of. let me know if this helps.

Posted on Jul 05, 2007

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I replaced the seats and springs in my delta single handle faucet put it all back together and now I have nothing. I took it apart again - actually several times and put it back together with the same


messy ,, but while u had it apart did u turn on the water to see if water would come out at all... we flushed our line and that cleared up the problem.

Jan 19, 2013 | Delta Plumbing

1 Answer

I need help putting my nikon s220 digital camera back together


Oh boy!!! I did the same thing once in 1964 on a Nikon F lens. I took away one important lesson from that experience; even the simplest looking lens or camera is mechanically complicated with interlocking parts. In my case, the camera repair man told me that the bill would have been $35 (that is about $150 in today's dollars) if I had not tried to fix it myself. It cost almost $100 to have him put everything back together again. At this point, anything you do will only make things worse. I would gather all the parts together and get an estimate from a qualified camera repair man or from the Nikon USA Repair Depot shown on there website. I hate to say it, but on an amateur camera you may find that the cost of repair will exceed the cost of a new camera. Good luck.

Feb 10, 2012 | Nikon Coolpix S-series

1 Answer

Black screen on Kodak M753


You have a bad CCD imaging sensor. Not worth repairing. Very common problem with most point and shoot cameras. Suggest you buy a new camera.

Jul 02, 2009 | Kodak Easyshare M753 Digital Camera

1 Answer

How do you fix a frozen flip video ultra?


I fixed mine! When I turned it on it only had the flip logo on the screen & it would only shut off if I took the batteries out. I tried everything - holding the on switch for 30 sec, holding the record button & the on switch for 30 sec, deleting every bit of data from the camera, reinstalling the software onto the camera, leaving the batteries out for a month... I took it apart & found a burnt spot on the motherboard. I scraped it with a pocket knife, put it back together & now it works like new!

Jun 23, 2009 | Pure Digital Flip Video Ultra Camcorder

1 Answer

Lcd on Video camera not working


take the LCD apart & look up the numbers on the back of it, order the part from were ever you find it form google & put the new one in urself when it arives, this will safe you @ least 100$ on someone else doing the same thing

Mar 17, 2009 | Sanyo Xacti VCP-HD2 Camcorder

6 Answers

Whenever I turn it on theres just a blue screen and I can't get it to record


It took me a while to figure this one out but I finally did and mine is back to working perfectly. The problem: The Play option worked fine but the camera did not. When turned to camera mode the blue canon screen would come up and then freeze. The only way to turn it off was to remove the battery.

The fix: I was brave enough to take the entire outer shell off the camera. On the main board, underneath the screen/battery side, all the different parts are connected together. There is a single connector from the lens that had come out of its port. The ribbon connector must have somehow been shaken out of the port at some point. With needle nose pliers I carefully fit the ribbon connector back into the port. I carefully reattached the outer shell and everything was back working!

I will warn you that this task takes some time due to many many screws. It's a lot better than sending it off for hundreds of dollars though.

Oct 12, 2008 | Canon Elura 100 Mini DV Digital Camcorder

2 Answers

Posted this question re replacing the felt on the dryer (causing stains)


You pretty much need to take the dryer all the way apart in order to get to replace the felt.  I pulled the drum out and took my time cleaning off all the old felt and glue residue before gluing the new felt guides on and putting the dryer back together.  I found details and parts to order at repairclinic.com

Jul 14, 2008 | Frigidaire FWSB5700DS Top Load Washer

1 Answer

Replacement LCD


I need to order one can u tell me where you ordered it from?

May 18, 2008 | Cameras

1 Answer

V3 never registers when I close it, battery is being wasted!


You forgot to replace a small magnet that goes in the upper right corner of the cover (when closed) next to the screen. Try to put a magnet in the circular hole.

Apr 24, 2008 | Motorola Mobility RAZR V3

Not finding what you are looking for?
Canon PowerShot SD1000 Digital Camera Logo

Related Topics:

79 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Cameras Experts

old marine
old marine

Level 3 Expert

2277 Answers

Ekse

Level 3 Expert

13434 Answers

Poul Brinchs Larsen

Level 2 Expert

159 Answers

Are you a Canon Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...