The machine will start filling with water and then start emptying, then two lights starts flashing along with the power light.
The manual said its a computer error, is there anything I can do to fix this?
Always reset your machine ;turn your dial to the end of the cycle [ the dot] it should flash 3 times quickly, then turn off the machine and on again.
then start washing again ...hopefully..worth a try.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I had this issue also and it was because I started the machine and had not turned on the water to it. However, it cleared when I unplugged the power cord, waited about ten seconds, then plugged it back in. I guess they need a "reboot" once in awhile, like a computer - at least mine did. Hope this works for you, too.
see this causes and fix it. God bless you F05
Water temperature sensor error
If during the water heating step in the wash cycle, the water temperature
sensor (NTC) value is out of range, or the heating element circuit has
failed, the F05 error code will be displayed.
• Check the Water Temperature Sensor, Heating Element and Element Relay
• Check connections to the Sensor, Heating Element and Relay
you will probably need to look inside it underneath and under the top cover and see if there are any tell tale scorch marks.
wires can sometimes rub off their insulation and may be shorting, but untill you look there's not much we can tell you.