- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
All you need to do is run the 2 rca's from the back of the headunit to the amp and run whe remote wire (which is usually blue or marked with a tag) to the amp.
You can download the complete instruction manual in PDF format from Sony CDX-GT11W support website by clicking this link.
You'll require Adobe PDF Reader installed on your computer to view the manual. If it is not already installed on your computer, download it free from: http://get.adobe.com/reader/
Hope this solves your problem. Thanks for using FixYa.
did you buy a factory radio connector to connect the old harness to the new radio wiring if not you can get one at wall mart for 20 dollars and it will be color coded
These are what I consider to be the standard wiring colours for Sony head units. The user manual does not even make reference to installation. Bit lame really:) Good luck ....happy installing
red-ignition power
yellow-constant power
black-ground
blue-remote signal
orange-dimmer White - Front Left +
White/black - Front Left -
Grey - Front Right +
Grey/black - Front Right -
Purple - Rear Right +
Purple/black - Rear Right -
Green - Rear Left +
Green/black - Rear Left -
Wont turn on
Wont turn on
×