Question about Sharp XR-1S Multimedia Projector

2 Answers

Projector i have a sharp notevision xr-1s projector and it heats up really fast and then shuts off because the temperature gets way to high, what is my problem or how can i fix it?

Posted by ryan campbell on

  • 2 more comments 
  • kevinkml Mar 13, 2008

    Just recently my xr-1s has been shutting off with only about 5 minutes
    of operation. The temp symbal comes on once it shuts down the only way
    to get it to power up again is to disconnect and reconnect power cord.
    then the same happens. I cleaned out any possible debris from the
    inside and it still does it. its is rarely used as it is in our family
    room in the basement (which is climate controlled. I am at odds.

  • eiram Jun 17, 2008

    My cooling fan works and i have the exact same heating problem. My lamp only has 195 hours on it. What gives?

  • stally858 Jul 16, 2008

    I also have this problem. After 5 to 15 minutes the lamp goes off and the lamp light goes red. Have to shut down and restart and then same thing happens. Cooling fan works fine.

  • armada41 Sep 06, 2008

    I also have the same problem. Has anyone had any success as how to fix this?? PLEASE HELP!



2 Answers


Does the cooling fan work?

Posted on Feb 28, 2008



  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a Notevision Sharp xr-1s projector and it wont work with my windows vista laptop. I tried it on my vista pc and xp laptop and it works fine.

Posted on Sep 23, 2007


Add Your Answer


Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have a white line that appears, varies in width, and will sometimes disappear.

if the line has a hazy edge, it may be that the light tunnel is collapsing or the dlp wheel needs to be replaced. if it is hard edged, it may be the dlp chip is bad.

May 10, 2012 | Sharp XR-1S Notevision DLP Projector, 800...

1 Answer

Will not get power

the power supply is bad and need to be replaced. you can get the part and do it yourself, or send it to a sharp service center. either way, try av solutions in ny. they're really good.

Jan 27, 2010 | Sharp XR-1S Multimedia Projector

1 Answer

How do i get rid of the start up screen?

press enter. then press menu, right arrow once, down to setup guide, enter, and select off.

Oct 24, 2009 | Sharp Notevision XR-1S Slide Projector

1 Answer


make sure the resolutions match. change it on the projector.

Mar 30, 2009 | Sharp Notevision XR-1S Slide Projector

1 Answer

Color shifting

this common to dlp projectors! THe DLP wheel has a has lost its alignement
the best way to solve this is to gt a new dlp wheel replacement

Feb 08, 2009 | Sharp XR-1S Notevision DLP Projector, 800...

1 Answer

I have a Sharp XR1X, blinking green light will not start

very common with this model, the ballast board needs repairs / this case the power & the ballast board is one single PCB

Feb 02, 2009 | Sharp XR-1S Notevision DLP Projector, 800...

2 Answers

Connecting the Sharp XR-1S to the macbook pro

Hi contact me if the issue persist and post me a message here

Jul 26, 2008 | Sharp XR-1S Multimedia Projector

1 Answer

Sharp XR-1S Projector

you'd be better off hooking the dvd up to an amp and run speakers off of that.

Jul 17, 2008 | Sharp XR-1S Multimedia Projector

Not finding what you are looking for?
Sharp XR-1S Multimedia Projector Logo

Related Topics:


Ask a Question

Usually answered in minutes!

Top Sharp Office Equipment & Supplies Experts


Level 3 Expert

8092 Answers

George Mclaughlin

Level 2 Expert

370 Answers

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6960 Answers

Are you a Sharp Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides