HP 2009m LCD monitor is cracked.

HP 2009M 20-Inch HD LCD Monitor 2009m/v/f (3 versions) there are 3 possible connections
VGA/DVI and HDMI (optinal)
only 1 cable matches the below unstated system.
the blue LED for power I thing means power is ok
amber for sure is sleep mode.
the Monitor tells you if an error happes.
then on camera system first.
then with cables connected.
turn on the monitor last.
the mother turns on goes blue button color
and if the camera system is dead the monitor will show for 5 seconds at least.
no signal
no cables connected
no sync
over-range, error.
or going to sleep now, and power lamp turns amber.


no "camera system " stated is it PC? what is it.

To me, it appears that the HP 2009m is only a monitor, see:
HP Pavilion 2009m Monitor Product Specifications and notice it has no wireless capability. Sometimes I have seen people use the model number off the monitor for the computer's model number. Take a look at the computer itself and look for a model number. I'm assuming you have a desktop, and not all desktops have built-in wireless. If it does, you should have a Wireless Network icon in the lower right of your display in the Notification Area by the Clock. But it would help to know your computer's actual model number as there are several scenarios to remedy your issue and I would rather focus on just one.

Ck the link below and this could fix the issue

Go to the control panel and check device manger. Look for sound device and see if there is an X or ?. X means disabled. ? means driver issue.

Note: make sure your speakers are work or try to connect your head phone to the green female input in the back of the pc or look for a head phone symbol

HP 2009m internal speakers HP Support Forum

Alt+F4 after pressing it. Small windows will be open then control it with arrow buttons.

1. Right-click the desktop, and then click Properties.
2.
In the DisplayProperties dialog box, click the Settings tab.
3.
Click the Display list and select your external monitor. If you do not see multiple monitors listed, your computer hardware may not support Dualview. You can still use MaxiVista to configure a second computer as an additional display, however.
4.
Select the Extend my Windows desktop onto this monitor option. Click Apply or OK.
Now you can have different windows open on my laptop's built-in display and the external monitor. I can move windows between the two displays and even stretch windows across both displays.

A professional TV/video repair-person knows how to open it, how to order the correct replacement part, and how to reassemble and test it. This is not a "do-it-self" repair, like changing batteries in a flash-light.

See: http://h10025.www1.hp.com/ewfrf/wc/product?product=3884701&lc=en

for parts information.

http://h10025.www1.hp.com/ewfrf/wc/product?product=3884701&lc=en&cc=uk&dlc=en&lang=en&cc=uk

You can find a detailed description how to connect your HP monitor to your computer here.
The 2009m might not have a VGA or HDMI connection (according to this source), but the option to use DVI. So you might have to go and get the correct cable or adapter.
Also look at the bottom of the page for more helpful links.

If you have any more questions, just come back here and leave a comment - I'm happy to help.

dirty switch. I took my 2009m apart and cleaned the switches with alcohol on a qtip and the problem's gone. Not too hard to do. Leverage the case gently with a putty knife or something and it will pop open. Then pop around the edge to remove the back completely.

OSD (On Screen Display) lockout. To resolve the issue you can hold the power button of the monitor until you get another message something similar to "OSD unlocked"

try holding menu button also if it doesnt workout