Last year a friend of mine bought the Quinny Speedi SX for my little newborn. As my child has grown (13 mo), she now wants to sit fully upright. I can not figure how to make the seat go up. I have seen the manual and how the backrest works but still it doesn't go FULLY upright.Do you suggest anything?
Evangelia from Greece
I got fed up of my little one getting annoyed because he wanted to sit up and the buggy wouldnt !! so i brought a luggage strap fixed it behind the seat around frame and cliped it together,seat goes upright, you can still vary the incline of the seat and take off when not needed! PROBLEM SOLVED! XX
We (illegally and no doubt voiding the guarentee) unpicked the two bits sewn on the side of the pushchair to get the seat more vertical. This worked well, and I then put a few stitches in round where the black webbing feeds through, to ensure it doesn't put too much strain on the holes.
Alternatively, get a long length of velcro, and use this from handle side to handle side, to pull the chair up straighter - fedding it through the originial loop (where the adjust is) to ensure it stays behind the back of the chair. B&Q now sells long strips of velcro. This won't void the guarentee, as it can be taken off.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If your Speedi is under 2 years old please return to your retailer with proof of purchase paperwork to discuss with them the terms and conditions of the 24 month chassis warranty and getting the chassis sent to our engineers for full inspection/repair work required.
If the Speedi is over 2 years old or you no longer have proof of purchase paperwork please contact our customer service department on 01284 413 141 Mon-Fri 8.30-4.30 to discuss costs of the item required.
In the middle of the underneath of the pushing handle, below where the hand brake lever is there should be a button. If there is, this is what you do. 1) put the foot brake on so the rear wheels wont turn. 2) unclip the clips on the frame that allow you to adjust the height of the pushing handle, they open up, and leave them open, like this the handle you push the buggy with should slide up and down. 3) pull this handle out to its tallest position 4) Hold the handle and press the button mentioned at the start in and hold it in 5) Then quite quickly push the handle down as though you were either pushing it to lower its pushing height, or shoving it away in a temper. It needs to be a firm and quick movement.
Ta da!! After a couple of tries it should click and fold up.