Question about Hardware & Accessories

1 Answer

Setting the clock on a brinks timer 44-1011

Is there a manual for th is timer?

Posted by evitalc31 on

×

Ad

1 Answer

Mike

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    New Friend:

    An expert that has 1 follower.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I finally found the instructions for the Brinks timer 44-1011 and they work.

    • BRINKS DIGITAL TIMER 44-1011 INSTRUCTIONS
    • CURRENT TIME SETTING
    • 1*Press and hold the OK button for 4 seconds. Hour Display flashes.
    • 2*Press +/MANUAL or - to select the hour. Press OK to confirm.
    • 3*Minute display will now flash. Press +/MANUAL or - to select the minute. Press OK to confirm.
    • 4*Press MENU to exit the time setting mode. Now the timer is in clock mode.
    • PROGRAM SETTING NOTE: This timer can be set up for up to 2 different programs. We will use PROG 1 for this example, however these steps can be repeated for any of the 2 programs. To cycle through the individual programs use the +/MANUAL or - after pressing MENU in step one until the desired PROG "#" is flashing. To clear a program setting hit the RECALL button when you have the program selected.
    • 1*Press MENU button, PROG 1 "ON" will flash, press OK.
    • 2*Hour will flash. Cycle with +/MANUAL or - to desired hour, press OK.
    • 3*Minutes will flash. Cycle through minutes +/MANUAL or - to desired minute, press OK.
    • 4*Program will be flashing again. Press +/MANUAL to get to PROG 1 "OFF" blinking, press OK.
    • 5*Repeat steps 2-4 to complete PROG 1 setting.
    • 6*When done setting programs press the MENU button to return to clock mode.
    • 7*Press +/MANUAL to have LCD showing either "AUTO ON" or "AUTO OFF" for the timer to execute the programmed settings.
    • DAYLIGHT SAVING TIME SETTING (DLST)
    • 1*In clock mode, press RECALL to turn on or off the Daylight Saving Time.
    • 2*Turn on DLST, the below of LCD shows +1H. Time is adjusted by adding one hour.
    • 3*Turn off DLST, +1H will disappear and LCD shows the real time. MANUAL OVERRIDE AND ALWAYS ON/OFF When in clock mode the +/MANUAL sign cycles through
    • 4 settings that serve as manual override. **ON - Indicates that the timer is in the ON mode, and will always be on regardless of the programmed setting. **AUTO ON - At this selection, the timer will come on regardless of the programmed setting, but it will follow the next programmed command. **OFF - Indicates that the timer is always off (i.e. the wall socket is turned off) **AUTO OFF - Indicates that the timer is in the OFF mode until the next programmed step that turns it ON.
    • NOTE: For normal timer function, the selection must be either "AUTO ON" or "AUTO OFF". RESET At any mode, press RESET for 5 seconds. All settings will be cleared, return to clock mode, 12:00 MO, AM, AUTO OFF will be shown on LCD
I hope this is helpful. It was a bear to find.

Posted on Dec 03, 2013

  • 2 more comments 
  • Anonymous Feb 15, 2016

    thanks - surprising how they fail to set up keywords to find source articles

  • Alison Hicks Dec 01, 2016

    This is great. Thanks! :D

  • James Lindley
    James Lindley Dec 19, 2016

    Thank you. I was just trying to remember how to program mine and these instructions are perfect.

  • Robert Brown
    Robert Brown Mar 23, 2019

    Thank you so very much! Best instructions! You're a lifesaver!

×

Ad

4 Related Answers

Anonymous

SOURCE: brinks 44-1030 manual i need a

1) Can you describe the timer in detail?
The buttons and the dial, shape, if it plugs in or is programmable, whatever you can think of to illustrate what timer looks like.
I have extensive files on timers
Most brinks timers are versions of other timers, and manuals exist for those timers.
Add a comment with the information, and I will post a manual if timer matches other brands.

2) You can open following link and see if your timer appears on the page:
Manuals appear for each timer on page with a few exceptions.
http://waterheatertimer.org/Woods-timers-and-manuals.html

3) Another step would be to buy the 44-1030 at Walmart and scan the manual into .jpg format.
Download Cute-writer the free pdf software.
Print your .jpg image but select cute-writer as the printer.
Instead of printing, the software makes a pdf manual.
I use this technique when I need a manual

Title your new manual and post it on the internet for sale.
Return the timer for a refund.

4) Add a comment for more free help.
Also take advantage of fixya phone service.
For a price, fixya expert speaks with you over phone while you describe timer.

Posted on Jan 10, 2011

Ad

Anonymous

SOURCE: I have a brinks 44-1030

Manual is shown on links below:
http://waterheatertimer.org/Woods-timers-and-manuals.html#Brinks
http://waterheatertimer.org/pdf/Brinks-44-1030-manual.pdf

Add a comment for more free help.
Also take advantage of fixya phone service.
For a price, expert speaks with you over phone while you work on any do-it-yourself project.
Fixya is always less expensive than a service call.

Posted on Jan 19, 2011

Anonymous

SOURCE: Need how to use my timer. Brinks digital plug in

Manual appears on following links:
http://waterheatertimer.org/Woods-timers-and-manuals.html#Brinks
http://waterheatertimer.org/pdf/Brinks-44-1020-manual.pdf

The manual has important illustrations, and has more words than allowed for free answer.
Open manual and get as far along as you can, and then add a comment where manual is confusing and I will help.

The battery is rechargeable type, so plug timer into outlet for hour and then unplug timer to set programming.

Add a comment for more free help.
Also take advantage of fixya expert assistance live.
For a price, expert works with you while you work on timer or any do-it-yourself project.
Fixya is always less expensive than a service call.

Posted on Mar 02, 2011

Anonymous

SOURCE: i have a brinks timer

1) Open following link to identify timer and download possible manual:
http://waterheatertimer.org/Woods-timers-and-manuals.html#Brinks

2) You can contact Hamptonproducts.com and they will send manual.

3) If you have a manual and cannot understand it, then add a comment and say what part of manual is confusing, and what you have tried so far, and what load you are wanting to turn on-off. Not every timer is right for every application, so clear identification of what you want to do is best.

Upvote the help.
And take advantage of fixya expert assistance live.
For a price, expert works with you while you work on timer or any do-it-yourself project.
Fixya is always less expensive than a service call.

Posted on May 17, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I turn off timer on a J V C soundbar


I am not aware of timer function. Visit http://books.jvc.com/booklist.asp?Model=th-ba1 to download the manual. Send me a picture of what you see on display. or explain in detail

Feb 15, 2015 | JVC TH-BA1 Soundbar System with Wireless...

1 Answer

Lost manual how to set timer TH-868C uberhaus


Copy following link to identify timer and download possible manual:
http://waterheatertimer.org/Woods-timers-and-manuals.html#59377

Gene
h

If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

Nov 10, 2013 | Hardware & Accessories

1 Answer

I am trying to st the timer to turn on at 5PM and turn off at 11PM.


You posted under Intermatic HB88RC timer
If you have different timer, add a comment

HB88RC timer manual:
http://waterheatertimer.org/pdf/hb88rc.pdf

HB88RC programming Instructions:
Install AA battery in timer so display will show, and you can program

Set clock:
Hold down clock button.
Press day button until current day displays.
Press Hour button until current hour displays.
Press min button until current minute shows.
Release clock button

Program timer:
Press PROG button until 1 ON displays
This is Event1 ON
Press Day button until selected day or days displays for event1 ON
If you want all week long, then press day button until all days show: MO TU WE TH FR SA SU
Press Hour button until 5pm shows >> this is event1 ON
Press Min button until :00 displays for event1 ON

Press PROG button until 1 OFF displays
This is Event1 ON
Press Day button until selected day or days displays for event1 OFF
Match days with ON time: so press day button until all days show: MO TU WE TH FR SA SU
Press Hour button until 7pm displays >> this is event1 OFF
Press Min button until :00 displays for event1 OFF

When programming is finished, press clock button to display current time

When programming is finished, press MODE button to select MODE > you want AUTO for timer programs to operate
Press MODE button once and this is manual override, and lights come on.
Press MODE button again and RDM displays, this is for random timer operation
Press MODE button 3rd time, and timer is set to AUTO
After setting MODE to auto, press clock button to display current time.

Plug timer into receptacle.
Plug lights into timer.

Dec 18, 2010 | Intermatic HB88RC - 7-Day Programmable...

2 Answers

I have an MTD8 timer, that fits into my main electrical board


MTD8 Timer - Instruction manual

1. This timer has a total of 8 ON / OFF programs.

2. MANUAL ON / AUTO / MANUAL OFF for easy setting.

3. Switchable 12 / 24 hour mode.

4. 16 timer combinations are available as follows:

Monday

Tuesday

Wednesday

Thursday

Friday

Saturday

Sunday

Mo, Tu, We, Th, Fr, Sa, Su

Mo, Tu, We, Th, Fr, Sa

Mo, Tu, We, Th, Fr

Mo, We, Fr, Su

Mo, We, Fr

Tu, Th, Sa

Mo, Tu, We

Th, Fr, Sa

Sa, Su


Initial operation:

1. When the timer is first connected to mains power, it will take up to 12 hours to charge the internal battery.

2. The settings can be defaulted by depressing the R (reset) button.


Setting Current Time.

1. Press the C+ (clock) button and hold, then simultaneously press the W+ (week) button until the actual day is displayed. Continue by pressing the H+ (hour) or M+ (minute) button until the current hour or minute is displayed. When setting, the W+, H+ and M+ buttons can be held down for rapid forward counting.

2. Release both buttons. The weekday and time will be set according to your selections.

3. To set incorrect time (etc.) repeat the settings.


Settings for programs:

1. Press the Timer button (Clock) and release. The first ON setting can now be made.

2. Press the W+ button to set the day or blocks of days. Select the ON time by pressing the H+ button and then the M+ button.

3. Press the Timer button (clock symbol) again to finish the first ON setting and enter into the first OFF setting. Repeat step 2 to set the first OFF setting.

4. Press the Timer button again to finish the first OFF setting and enter into the second ON setting. Repeat steps 2 and 3 to program the remaining settings.


When setting block dates, the ON and OFF times apply to all dates in the block.

I.E. Selecting block Mo, Tu, We, Th, Fr, Sa, Su and setting ON to 10:00 and OFF to 16:00 means that the selected times automatically apply to all the indicated days in that block.


Specifications: 230Vac 50 or 60Hz. 16A Inductive load. 20A Resistive load.

Battery backup >100 hours. Accuracy: +/- 1 minute per month. Temp: -10 to +40 deg C.

Apr 18, 2009 | Hardware & Accessories

1 Answer

Machine won't spin dry


The timer is th emost common problem. You can purchase a replacement timer and install it

Apr 14, 2009 | Home

1 Answer

My car start on is own.


Sounds like you have it set in timer mode. Click on the following link for the manual---------> Click on the following link for the manual---------> http://www.directeddealers.com/manuals/og/viper/G564V_07-05.pdf

the manual should explain how to exit timer mode.

Hope this helps,
Luis

Nov 23, 2008 | 791XV The 791XV is a 2-way Security and...

Not finding what you are looking for?
Hardware & Accessories Logo

Related Topics:

27,257 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hardware & Accessories Experts

Gene Haynes

Level 3 Expert

5391 Answers

Brad Brown

Level 3 Expert

18360 Answers

Tom Chichester

Level 3 Expert

55379 Answers

Are you a Hardware and Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...