I can't get back to selection of languages screen

Press and hold SELECT while turning on the printer. Hold SELECT until "Select Language" appears.
Release SELECT. INITIALIZING appears. Wait for LANGUAGE=ENGLISH to appear.
Press -VALUE+ repeatedly until the desired language appears.
Press SELECT to save your choice. An asterisk (*) will appear beside the selected language.
Press GO to exit the menu.

You can change the OSD language (that the camcorder displays the menu screen/options and messages) by:
1. Press the MENU button - the menu screen appears 2. Press the < (left) or > (right) button to select "Settings" - the settings menu appears 3. Press the ^ (up) or v (down) button to select "Language" and then press the OK button 4. Press the ^ (up) or v (down) button to select the desired OSD language (English), and then press the OK button 5. When you're done, exit by pressing the MENU button and all the menu options & messages will be refreshed in the selected (English) language.

Hello
To select the language, do the following.

[1] Press Menu and the press Left or Right arrow on the remote to select language option.

Choice of language selection [3] will appear on the screen.
English, Espanol and Francias

[2] Press Up or Down arrow to select the desired lannguage you want to be displayed on the screen. Then press ENTER.
[3] Press Menu repeatedly to exit the Menu screen to be cleared.
OK.

For the LJ4000 to change the control panel language:

Turn off the printer.

On the front panel, hold down the SELECT key.

Turn the printer on, while continuing to hold the SELECT key.

When the Select Language message is displayed release the SELECT key.

Initializing will display on the control panel. After 5-7 seconds Language=English will display.

Press the VALUE key until the desired language is displayed.

Press the SELECT key and an asterisk will appear. The asterisk indicates that the printer has saved the new setting.

Press the GO key to display Ready in the language that was selected.


NOTE: If Select Language does not appear in the display, hold down the SELECT button until you hear the motors rotate, then release. Following printer initialization, the Language= menu will appear in the display.
hope it helps, if so do rate the solution

Follow these steps to change language setting on the printer display :
1.On the printer control panel, press the Left arrow twice or the Right arrow seventeen times on the Menu button until SELECT LANGUAGE? appears on the printer display screen.

NOTE: If the language is currently set to a language other than English, the Select Language? menu option will appear in that language.

2.Press the OK button.
3.Press the Left or Right arrows on the Select Photos button until your desired language appears.

NOTE: Even if the printer is currently set to another language, the name English will appear in the English language.

3.Press the OK button to select the language. A message requesting confirmation of the selection will appear appears. If the correct language is displayed, press the OK button. If the incorrect language appears, press the CANCEL button and start the selection process again.
4.When the SELECT COUNTRY/REGION? setting appears on the printer display screen press the OK button to continue.
5.Press the Left or Right arrows on the Menu button until the desired country/region appears on the printer display screen.
6.Press the OK button to select the country/region.

to change your language setting back to english Turn on your HTC Touch. Touch "Start" on your Home screen. Then "Settings."> System > Regional Settings. Select the proper region for english language then. Touch "OK" when prompted and "Exit."

Confirm that your selection has taken effect by checking the language of any menu item from the Start screen. Your selections should be in english.hope this helps pls do let me know.thanks.

Changing the Control Panel Display Language

The default control panel display language is set for English.
Supported languages are: English, French, German, Italian,
Spanish, Finnish, Danish, Dutch, Swedish, Norwegian, Turkish,
Polish, and Portuguese. Follow these instructions to change the
display language.

1 Switch OFF the printer.
2 Press and hold Select while switching the printer ON until
SELECT LANGUAGE appears in the display.
3 After the power-on self test, LANG=ENGLISH appears. Press
[Value+/-] until the desired language appears in the display.
4 Press [Select] to save your choice. An asterisk (*)appears next
to the language to indicate it is now the default.
5 Press [Go]. The On Line indicator is lit, and display messages
are now in the language you selected.

Follow the following steps:

1. Turn off the printer.
2. Press and hold down the right VALUE button.
3. While holding down the right VALUE button, press and release the POWER button.
4. When INITIALIZING appears in the LCD, release the right VALUE button.
5. The message VALUE AND SELECT KEYS TO CHOOSE LANGUAGE is displayed in the LCD and the currently selected language is displayed as =ENGLISH .
6. Press the VALUE button until the desired language is displayed.
7. Press the SELECT button and the desired language is now selected and displayed in the LCD and the printer returns to the READY state.

I got this from the disney.com/videogames web-site. It works.
1. Put in game and turn on.
2. At Menu tap the bottom listing (Op...)
3. Tap the top listing until English appears. It goes through a bunch of languages.
4. Then hit the arrow on lower left of screen and you are all set.

I don't know I need help.