Hi;I have a panasonic projection TV when power on it shut down after five minutes. Any help will be gratefull. Thank you.
Theres a cap in the powerm supply 1ooomfd/16 volts change it to 1000mfd/25volts breaking down under load and watch for the temperture rating get 105 not 85 which they use at the factory.
Take the back of the TV coved off. About 12 Phillips screws. Then use a can of compressed air and clean all the dust out. You'll be shocked at how much dust there will be. Use a vacuum to suck the flying dust. Be careful not to bump anything with the vacuum hose. Robert
From the brief description of your problem it sounds like you have a component in your unit which is overheating after a short time and shorting out causing the set to shut down. It could be anything. If you are not a tech you will need to find a reputable repair shop. I doubt you could find this, most techs will have problems with this one. Cost should not be that much. The biggest problem will be finding the problem. Good luck.
Usually answered in minutes!