Question about Cannon Canon i960 Photo Printer

2 Answers

Cannon irc2620n i need to dismantle this copier to take it up stairs how can this be done ?

Posted by henry long on

  • henry long Jun 18, 2007

    i need to take it apart because the staircase dose not have the room for more than two people to lift it and it is to heavey



2 Answers


The best solution is to call in the people who installed it originally. If they break it on the way up the stairs, they pay for the repairs!

Posted on Sep 23, 2007



  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has answered 1,000 questions.

  • Master
  • 2,985 Answers

Why? Take it apart that is?

Posted on Jun 18, 2007


Add Your Answer


Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do i clean the ink absorber on a canon pixma mg2120?

This is a very mucky job and requires printer to be almost fully dismantled. This can be done if you are good with this sort of thing.
Then all waste ink would need to be washed out with water, pads fully dried and then rebuild printer.

Dec 21, 2014 | Canon Office Equipment & Supplies

1 Answer

How do I disassemble a stairmaster

This link will take you to a service/owner's manual for the 4600PT - at the very end is the parts diagram that might help you dismantle the machine or at least let you know what type of hardware you will be coming across and how it goes together:

Feb 09, 2014 | Stairmaster 4600PT Stepper

1 Answer

How to dismantle reebock run machine 1.75 toget it up 2 flights of stairs

Google for a owner manual to see if this is even possible.

Nov 29, 2012 | Televison & Video

1 Answer

Dismantle the Canon PC6 copier to remove paper fragments.

Try to dismantle it by the look, you need to remove leftside covers.
If you want I can send you service manual.
[email protected]

Jul 03, 2010 | Canon Office Equipment & Supplies

1 Answer

How can I dismantle a minivator stair lft myself

Hello J
I am just about to try and dismantle one myself and am also looking for answers, particularly about the best way to remove the chair from the track. The rest I think will be easy.
Have you found anything out you might pass on to me???
I would be very grateful for your response.
Terry [email protected]

Nov 03, 2009 | Kitchen Appliances - Others

1 Answer

Dismantling Printer to be able to carry down stairs.

Yeah. On the back of the document feeder there is one white molex connector. Unscrew the 2 thumb screws and lift up and puch back gently while lifting the feeder. The hinges will release pretty easily, then set it aside.
Also the paper tray, pull it forward, then up and out.
Removing those will make it much easier to move.
If you have a third tray, it should just be sitting on it. If the did install the clips, take the back cover off and remove the screws and plate. But most M20s with a lower tray, they just sit on the machine.
If it is conncected to a stand, just remove the back screws and lift it off the stand.

May 15, 2009 | Xerox WorkCentre M20i All-In-One Laser...

2 Answers

Request manual for treadmill.

I have a manual for this exact treadmill. Don't have a scanner though. I checked with my local print shop ans they said they could scan it and save as a pdf for $10, if you are interested.

May 11, 2009 | Exercise & Fitness

1 Answer

How to shampoo stairs

HERE is the manual
When rating my solution rate the clarity of the explanation NOT whatever you like Kirby stair shampoo system. I do not believe this is the way to shampoo either but this is not me who designed it. Will get the job done but it is a lot of scrubbing and rubbing.

Good Luck

Mar 24, 2009 | Kirby G5 Bagged Upright Vacuum

1 Answer

Measuring for stair carpet

measure the length of the tread and riser, combined. Typically this will be 17 inches or so. Add at least an inch or two for good measure then, assuming all the stairs are the same, multiply by the number of stairs and, in most cases add for one additional riser. This is for straight stairs with no landings or turns. For pie-shaped stairs one needs to measure the longest points for the trad portions.

Sep 03, 2008 | Office Equipment & Supplies

Not finding what you are looking for?
Cannon Canon i960 Photo Printer Logo

Related Topics:


Ask a Question

Usually answered in minutes!

Top Cannon Office Equipment & Supplies Experts

Cindy Wells

Level 3 Expert

6253 Answers

Eric Engel

Level 2 Expert

124 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Are you a Cannon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides