An expert who has written 20 answers of more than 400 characters.
Re: Display problem wid a PS2.....
Hi there. Have you tried another set of cables ? They might be the issue. Other than that, check for a solid connection on the back of the TV where the cables are connected, and also on the PS2 itself. You might wanna try on another tv if it's possible for you.
If the issue is still there with another A/V cable, on another tv, and if the cables are connected firmly, the problem can be the video output controller on the PS2 mainboard that is going nuts. I've seen a such issue once, and the PS2 mainboard was going bad slowly. Solution was to, unfortunately, replace the PS2 :|
Hope that helps, cheebster.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
This happens to me , Some games don't work on Some PS2 consoles for Example my friends Theme park world only works on a Slim PS2 and not a Proper Fat one , Wat type of PS2 do u have? and wat game r u trying to play?
You can adjust screen display settings while playing PlayStation 2. Press the PS button on the Wireless Controller during gameplay and then select [Settings], adjust the following settings.
Normal: Set to upscale and display at a size that matches the screen size.
Full Screen: Set to upscale and display at full screen by changing proportions and stretching the image.
This setting can be selected only when [Normal] or [Full Screen] is selected under Settings > [Game Settings] > [PS / PS2 Upscaler].
You might of had one of the wires connected from the TV to the PS2 damaged and may need new ones or just make sure that the wires connecting each other from the TV to the PS2 are well connected. My little brother use to drop my PS2 a lot too and that happened to me once, but it turned out to only be that the wire got pulled too much when it fell and it disconnected from the TV to the PS2 and I had to only put it in well.
is u r ps2 modify if yes than try this
turn off u r ps2 and press 2 buttons togather trangle and cercle now turn it on u get one menu in u r screen and in first line of menu u get ntsc wrriten press X buttons u get it change turn it in pal o r ntsc
now press start button in u r joy stick it will display setting saved now turn off ps2 and turn it on now u get colours in u r games . REMEMBER U R PS2 SHOULD BE MODIFY SO U CAN DO ABOVE SETTINGS
WITH MODBO 3.0 IC IT WILL DISPLAY MATRIX WHEN U GET IT START U R PS2
There are probably a few problems here. What are you using to play the disc? Some NTSC players will "play" a PAL disc but interpret it as NTSC with the symptom you are describing. You need a DVD player that will play PAL. Many of those will output NTSC directly when set up to do so. The other alternative is to have a PAL compatible player that will output PAL into the converter. To narrow this down specifically, please post the model numbers and the connection scheme for your equipment. Once I understand your current setup, I should be able to describe a method to get this to work for you.
I have a similar problem except I have a Diamond Vision (small) TV and I have my ps3 (The old one not the new one) hooked up to it but I can't seem to find the channel to display it? (I do not have the remote to my TV)
After more checking around I found out this is not an uncommon problem with the wii. Apparently there is a design flaw that causes the graphics card to overheat, which creates various types of distortion. It may have something to do with using wiiconnect24. I am sending my wii back to nintendo for repairs.
Unlike the PS2 original, PS2 slim doesnt have a fan.
Playing it for 2 days, it most likely overheated and burnt something inside. I would return the console and get a replacement, if you have warrently.